نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Transition Networks C4110-4848 fiber repeater unit

Transition Networks

Transition Networks C4110-4848 Backup Media

SKU CH-Z7WY-HTKHT

Multi-rate fiber-to-fiber repeater supports Gigabit Ethernet, SONET/SDH, 10 Gigabit Ethernet, Fibre Channel, 2Gb and 4Gb Fibre Channel

  • Protocol-independent fibre repeater extends links without signal conversion
  • Multi-rate support handles Gigabit, 10 Gigabit and Fibre Channel on one unit
  • Transparent operation preserves original framing and timing across the connection
  • New condition ensures full manufacturer specification from first deployment
  • Model C4110-4848 identifies the exact hardware for spares and documentation

Protocol-Independent Fiber Repeater

The Transition Networks C4110-4848 is a protocol-independent fiber-to-fiber repeater built for network infrastructure. It extends fiber links across single-mode or multi-mode cables without converting the signal protocol. Network engineers use it to bridge long-haul campus runs, metro rings or data-centre interconnects where signal regeneration is required.

Suited for Transparent Link Extension

This unit suits teams that need transparent regeneration for Gigabit Ethernet, Sonet/SDH, 10 Gigabit Ethernet, Fibre Channel, 2Gb and 4Gb Fibre Channel signals on a single device. It does not suit buyers who need copper connectivity, wavelength conversion, managed switching features or protocol translation between dissimilar standards.

Multi-Rate Protocol Transparency

The single specification that decides fit is multi-rate protocol transparency across the listed Ethernet, Sonet/SDH and Fibre Channel standards. If the link carries any of those protocols at line rate, the repeater regenerates the optical signal without re-clocking or frame inspection. If the traffic uses a different protocol or requires wavelength translation, this is not the correct part.

أبرز المميزات

  • Protocol-independent fibre repeater extends links without signal conversion
  • Multi-rate support handles Gigabit, 10 Gigabit and Fibre Channel on one unit
  • Transparent operation preserves original framing and timing across the connection
  • New condition ensures full manufacturer specification from first deployment
  • Model C4110-4848 identifies the exact hardware for spares and documentation

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

أسئلة حول هذا المنتج

How do I install the C4110-4848 fiber repeater and which step is often missed?

Mount the unit in a rack or shelf, connect the two fiber links to the matching ports, and apply power; the step most often missed is confirming both links use identical wavelengths and distance ratings before powering on.

What maintenance or replacement will the C4110-4848 need over time?

Plan to inspect and clean the fiber connectors periodically; the only field-replaceable items are the SFP transceivers if a link budget degrades or a port fails.

What limit appears first on the C4110-4848 during sustained high-throughput use?

The protocol-independent repeater forwards line-rate traffic up to 10 Gigabit Ethernet speeds, so the first limit encountered is the fixed bandwidth of the installed SFP modules.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.