نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Five stainless steel MK10 nozzles with 0.4mm openings and M7 threads

Unique-Bargains

Unique-Bargains 0.4mm MK10 Stainless Steel Nozzle 5pcs 3D Printers Accessories

SKU CH-N8F0-4KHSQ

Pack of five 0.4 mm stainless-steel MK10 nozzles for 1.75 mm filament, M7 thread, 13 mm overall length

  • Compatible with 1.75mm filament MK10 printers
  • Stainless steel construction resists abrasive filament wear
  • Smooth contact surface ensures reliable thermal connection
  • Five nozzles stamped for quick size identification
  • Clean M7 threads simplify installation and recalibration

Compatible MK10 Nozzle Pack

This five-piece set provides 0.4 mm stainless-steel nozzles built for MK10-style hot-ends that accept 1.75 mm filament. Each nozzle carries an M7 thread with a 4 mm thread length and an overall size of 13 x 9 mm. The stamped size marking lets you identify the correct piece quickly.

Makers printing standard filaments

The stainless-steel construction suits everyday materials such as PLA and ABS within the 180-220 and 240-280 temperature ranges noted for those filaments. Users who require hardened tips for abrasive composites or a different bore diameter will need a different nozzle type.

Verify hot-end fit before ordering

Confirm your printer uses an MK10-compatible heat block with an M7 thread and 4 mm thread engagement. After installation you must recalibrate the nozzle-to-bed gap to restore first-layer quality.

أبرز المميزات

  • Compatible with 1.75mm filament MK10 printers
  • Stainless steel construction resists abrasive filament wear
  • Smooth contact surface ensures reliable thermal connection
  • Five nozzles stamped for quick size identification
  • Clean M7 threads simplify installation and recalibration

المواصفات

BrandUnique Bargains

أسئلة حول هذا المنتج

Will these nozzles fit my MK10 hot-end that uses M7 threading?

Yes, each nozzle has an M7 thread with a 4 mm thread length made for MK10 printers.

Can I keep using 1.75 mm PLA and ABS filament with these stainless steel nozzles?

The 0.4 mm bore is sized for 1.75 mm filament and the stainless steel handles PLA at 180-220 °C and ABS at 240-280 °C.

How do I verify the new nozzle is seated correctly after installation?

Heat the hot-end to the filament target temperature, hold the heat block with a spanner, and tighten the nozzle with a socket screwdriver until snug, then recalibrate the nozzle-to-bed gap.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.