نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Tall black tower duplicator with 55 USB 3.0 ports and blue LCD display

VinPower

VinPower USBSHARK-55T-BK 55-Target USB 3.0 Duplicator

SKU CH-8SB7-6593Z MPN USBSHARK-55T-BK

Standalone USB 3.0 duplicator copies one source to 55 targets asynchronously with 128M buffer and a 20 x 2 blue LCD

  • TypeUSB Flash Drive Duplicator
  • Target1 to 55
  • Buffer Memory128M
  • Display20 x 2 Blue LCD
  • Operating TypeStandalone
  • ConnectorUSB 3.0

Target 1 to 55

الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.

  • Copies 55 USB drives at once from one master
  • 128 MB buffer keeps each channel running at full speed
  • Standalone operation with 20×2 LCD — no PC needed
  • Asynchronous duplication lets every target finish independently
  • USB 3.0 interface moves data fast across all ports

USB flash duplicator for high-volume workflows

The VinPower USBSHARK-55T-BK is a standalone USB 3.0 flash drive duplicator built for organisations that need to clone one master drive to many targets at once. It handles one-to-55 duplication without a host PC, making it suited to IT departments, duplication services and OEM fulfilment lines that value speed and autonomy.

Tower chassis with 55 ports and asynchronous copy

The black tower measures 30.00" high, 7.50" wide and 21.00" deep, housing 55 USB 3.0 target ports in a vertical layout. Asynchronous duplication lets each port write independently, so a slow target does not hold back the others. A 20 x 2 blue LCD shows job status and menus, and the 128M buffer memory smooths data flow across all channels during simultaneous writes.

55-target capacity defines the scaling limit

The single specification that decides fit is the 55-target maximum. If your typical batch size exceeds 55 drives you will need multiple units or a larger system; if you only ever duplicate a handful of drives, a smaller duplicator will be more cost-effective. Power input accepts 90 to 240 V AC for worldwide use.

أبرز المميزات

  • Copies 55 USB drives at once from one master
  • 128 MB buffer keeps each channel running at full speed
  • Standalone operation with 20×2 LCD — no PC needed
  • Asynchronous duplication lets every target finish independently
  • USB 3.0 interface moves data fast across all ports

المواصفات

BrandVINPOWER
ModelUSBSHARK-55T-BK
TypeUSB Flash Drive Duplicator
Target1 to 55
Buffer Memory128M
Display20 x 2 Blue LCD
Operating TypeStandalone
ConnectorUSB 3.0
Panel ColorBlack
Dimensions (H x W x D)30.00" x 7.50" x 21.00"
FeaturesComplete Standalone Operation:
No PC required to operate the duplicator.
Asynchronous Duplication:
Able to copy any size master data onto multiple sources asynchronously (independently) without sacrificing duplication speed or quality for faster and more reliable duplication.
Smart copy feature:
This feature is used to quickly copy all accessible content contained on the USB device.
Supports all data Formats with bit by bit duplication
Supports most currently available USB drive:
Supports most currently available USB drive in the market
Future functions upgradeable through firmware:
Power Supply90 - 240 V AC
وزن الشحنة20.50 kg
أبعاد الطرد889 × 660 × 305 mm

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

What USB standard do the 55 target ports use and what transfer rate does it cap at?

The 55 target ports use USB 3.0 connectors. The duplicator copies asynchronously so each port runs independently at up to the USB 3.0 rate.

How much space does the tower need on a bench or shelf?

The unit measures 30.00 inches high, 7.50 inches wide and 21.00 inches deep. Allow clearance above for the lid and at the rear for the AC inlet.

How do I start a copy job without a PC and what step do users often miss?

Insert the source into the top port, load targets into the 55 ports, then press Start on the 20 x 2 blue LCD menu. The step often missed is confirming the asynchronous mode setting before starting.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.