نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

WMtec

WMtec DPS-200PB-185 190W server power supply 100-240V 52V 2.5A

SKU CH-NMGK-QTX5G MPN DPS-200PB-185

Delivers 190 W at 52 V 2.5 A and 12 V 5 A for Dahua PoE DVR units

  • 190 W output powers Dahua POE DVR systems
  • 100-240 V AC input works on global mains voltages
  • 52 V DC at 2.5 A plus 12 V at 5 A supplies dual rails
  • 47-63 Hz frequency range matches standard grid supply

WMtec 190W server power supply

The WMtec DPS-200PB-185 is a 190 watt server power supply designed for Dahua POE DVR equipment. It accepts a wide AC input range of 100 to 240 volts at 3.5 amps and 47 to 63 hertz. The unit delivers DC outputs of 52 volts at 2.5 amps and 12 volts at 5 amps. This new component suits technicians maintaining compatible surveillance recorders.

Check your DVR power specifications

Verify that the target recorder requires exactly 52 volts DC at 2.5 amps and 12 volts DC at 5 amps before ordering. Confirm the AC mains in the installation site falls within the 100 to 240 volt range. Ensure the physical connector and form factor match the original Delta DPS-200PB-185 B unit. Buyers needing different voltage rails or higher total wattage should look elsewhere.

أبرز المميزات

  • 190 W output powers Dahua POE DVR systems
  • 100-240 V AC input works on global mains voltages
  • 52 V DC at 2.5 A plus 12 V at 5 A supplies dual rails
  • 47-63 Hz frequency range matches standard grid supply

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

أسئلة حول هذا المنتج

What comes in the box with the WMtec DPS-200PB-185 and do I need any extra cables?

The unit is supplied as a standalone 190 W server power supply with an IEC inlet for a standard mains lead; a power cord is not included and must be sourced separately.

Which output rail should I use for a Dahua POE DVR that requires 52 V?

Use the +52 V 2.5 A rail; the secondary +12 V 5 A rail is present but not needed for the DVR.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.