نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Compact silver SFX unit with dual rear fans and hot-swap handle

ZIPPY

ZIPPY R2W-6500P-R 500W SFX power supply

SKU CH-94VW-4PCW8 MPN R2W-6500P-R

500 W SFX redundant supply with hot-swap modules, active PFC, dual 38 mm fans and 48-pin industrial connectors

  • TypeSFX
  • 500 W maximum output supports demanding server loads
  • SFX form factor fits compact chassis designs
  • Hot-swappable redundancy keeps systems running during module replacement
  • Dual EMI filters meet FCC Class B and CISPR22 limits
  • Active PFC with full-range 115-240 V input ensures stable power worldwide

SFX 500 W redundant server supply

The ZIPPY R2W-6500P-R is a hot-swappable SFX power supply rated at 500 W. It accepts 115-240 V AC input at 47-63 Hz and delivers a 12 V rail up to 32 A. Active PFC meets IEC-1000-3-2 Class D requirements. Two 38x38x28 mm DC fans cool each module. Dimensions are 300.00 x 101.00 x 84.00 mm.

Suits redundant server builds.

This unit targets server chassis that support hot-pluggable redundant power modules using 48-pin industrial connectors. Builders working with standard ATX or SFX single-supply cases cannot use the redundant form factor or the specialised connector. Operators needing silent office operation should note the dual-fan cooling design. The operating temperature range is 0 °C to 40 °C.

Redundancy and EMI filtering included

Hot-swappable redundancy lets a failed module be replaced without shutting down the system. Dual EMI inlet filters comply with FCC Class B and CISPR22 Class B limits. Safety certifications cover UL 1950, CSA 22.2 No. 950 and TUV IEC 950. Optional Serial ATA connectors can be added for drive power. Humidity tolerance spans 20-95 % operating and 10-95 % non-operating.

أبرز المميزات

  • 500 W maximum output supports demanding server loads
  • SFX form factor fits compact chassis designs
  • Hot-swappable redundancy keeps systems running during module replacement
  • Dual EMI filters meet FCC Class B and CISPR22 limits
  • Active PFC with full-range 115-240 V input ensures stable power worldwide

المواصفات

TypeSFX

أسئلة حول هذا المنتج

What existing server chassis and 48-pin backplane do I need to install this R2W-6500P-R module?

This SFX redundant supply requires a compatible server chassis with a matching 48-pin industrial connector backplane; it hot-plugs directly into that slot without cables.

Will my older components that draw from the 12 V rail stay within the 32 A limit of this unit?

The single 12 V rail delivers up to 32 A, so legacy drives and cards must not exceed that combined current; Active PFC and dual EMI filters maintain clean power for mixed-age hardware.

How can I confirm the R2W-6500P-R is operating correctly after installation?

Verify the two 38 mm DC fans spin, the module seats firmly in the 48-pin slot, and the server POST completes; normal operation stays within the 0–40 °C range.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.