نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Brown PLA Pro filament on a 1kg spool, 1.75mm diameter, vacuum-sealed

Ziro 3D

Ziro 3D PLA Pro Filament 1.75mm 1kg Brown

SKU CH-R1A6-D9540

1.75 mm PLA filament on a 1 kg spool with ±0.03 mm tolerance for consistent extrusion

  • ColorBrown
  • TypeFilament

Color Brown

  • Precise prints from strict ±0.03mm diameter tolerance
  • Filament stays dry in vacuum-sealed, air-tight packaging
  • Smooth extrusion with low shrinkage and strong layer adhesion
  • 37 colour choices including this rich brown PLA
  • Biodegradable PLA prints at 190-220 °C without a heated bed

Precise 1.75 mm PLA filament

Ziro 3D PLA Pro filament is manufactured to a strict ±0.03 mm tolerance for consistent extrusion. The 1 kg spool contains roughly 330 m of biodegradable polylactic acid in a rich brown shade. Vacuum-sealed packaging keeps the material dry until it reaches the printer. It suits makers who want reliable, odour-free prints without a heated bed.

Dimensional tolerance ±0.03 mm

The ±0.03 mm diameter tolerance is the single specification that determines whether this filament will feed cleanly through a Bowden or direct-drive extruder. Tighter control reduces variation in line width from layer to layer and helps prevent clogs or under-extrusion. Printers calibrated for standard 1.75 mm filament will benefit most from this consistency. Builders who need exotic composites or high-temperature materials should look elsewhere.

Ready to load on common FDM printers

The spool arrives vacuum-sealed and tangle-free, so it can be mounted and fed straight into most FDM printers that accept 1.75 mm filament. Recommended nozzle temperature is 190–220 °C with an optional bed temperature of 50–60 °C. Print speeds of 30–90 mm/s work well. The main issue users encounter is forgetting to reseal the bag between prints, which lets moisture degrade layer adhesion.

أبرز المميزات

  • Precise prints from strict ±0.03mm diameter tolerance
  • Filament stays dry in vacuum-sealed, air-tight packaging
  • Smooth extrusion with low shrinkage and strong layer adhesion
  • 37 colour choices including this rich brown PLA
  • Biodegradable PLA prints at 190-220 °C without a heated bed

المواصفات

ColorBrown
TypeFilament

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

How does the ±0.03 mm tolerance affect print quality in my printer?

The tight tolerance keeps the filament diameter consistent, so each layer extrudes the same width. That reduces blobs, gaps and clogging, giving cleaner walls and stronger layer adhesion across the whole 330 m spool.

What does the 1.75 mm diameter mean for compatibility and temperature settings?

The 1.75 mm size fits most FDM printers from brands such as Creality, Anycubic and Bambu. Print at 190–220 °C with an optional bed at 50–60 °C; speeds of 30–90 mm/s work well.

Will the 209 × 209 × 73 mm spool fit on my printer’s holder?

The spool measures 209 mm in diameter and 73 mm wide, so it fits standard side-mount and top-mount holders. Net weight is 1 kg, gross 1.3 kg, and the vacuum-sealed pack keeps the PLA dry until you load it.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.