نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black 70mm square case fan with ball bearing and three-wire connector

Zyvpee

Zyvpee 2810KL-04W-B79 70mm 12V 0.46A 3-Wire Ball Bearing Case Fan

SKU CH-J629-R5657

A 70mm ball-bearing case fan delivering high-volume airflow for CPU coolers and server chassis at 12V 0.46A via a 3-wire connector

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector3 Wires
  • ColorBlack
  • LEDNon-LED
  • High airflow from 70 mm frame suits tight CPU coolers
  • Ball bearing design extends service life under continuous server loads
  • 12 V 0.46 A draw keeps power budget low
  • Three-wire connector enables speed monitoring on standard headers
  • Non-LED black finish blends into any build without light bleed

Compact 70 mm server fan

The Zyvpee 2810KL-04W-B79 is a 12 V DC axial fan built for CPU cooler mounting in tight server or workstation chassis. Its 70 by 25 mm frame targets builders who need focused airflow in a small footprint.

Straightforward three-wire install

A standard three-wire power connector plugs directly into most motherboard or controller headers. Ball bearings reduce the risk of sleeve-bearing wear, though the fixed 12 V 0.46 A draw means speed control depends entirely on the host header capabilities.

Steady airflow under continuous duty

Ball-bearing construction maintains consistent rotation during prolonged high-volume operation typical of server environments. The non-LED black frame adds no extra heat, so thermal behaviour stays predictable across extended workloads.

أبرز المميزات

  • High airflow from 70 mm frame suits tight CPU coolers
  • Ball bearing design extends service life under continuous server loads
  • 12 V 0.46 A draw keeps power budget low
  • Three-wire connector enables speed monitoring on standard headers
  • Non-LED black finish blends into any build without light bleed

المواصفات

BrandZyvpee
Series2810KL-04W-B79
Model2810KL-04W-B79
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector3 Wires
ColorBlack
LEDNon-LED
FeaturesDC axial fan
Dimensions70*25mm

أسئلة حول هذا المنتج

How can I confirm the 2810KL-04W-B79 is spinning correctly after I connect its 3-wire plug to the motherboard?

The 3-wire connector carries a tachometer signal so the BIOS or monitoring software will report the fan speed in RPM; if a reading appears and the blades turn smoothly, the unit is operating as intended.

Does the 2810KL-04W-B79 ship with any screws, adapters or cables, or must I buy mounting hardware separately?

The supplier description only shows the fan itself; no screws, adapters or extra cables are mentioned, so plan to source four 70 mm mounting screws or rubber isolators separately.

The model code includes 12 V and 0.46 A — which version should I choose for a standard 12 V motherboard header?

The 2810KL-04W-B79 is rated for 12 V at 0.46 A, matching a typical 12 V 3-pin header; choose this exact model when your board supplies 12 V and you need a 70 mm ball-bearing replacement.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.