نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black 80 mm square case fan with 4-pin connector

Zyvpee

Zyvpee 3106KL-04W-B86 80 mm 4-pin case fan

SKU CH-0782-4HFA3

Cools CPUs with an 80 mm ball-bearing fan running at 12 V, 0.5 A via a 4-pin connector

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Cooling
  • Ball bearing for reliable long-term operation
  • 12 V 0.5 A 4-pin PWM control for precise speed regulation
  • 80 mm square frame fits standard 8015 mounting holes
  • Non-LED black design keeps the build clean
  • 15 mm thickness suits slim CPU and case cooling slots

Zyvpee 80 mm 4-pin case fan

The Zyvpee 3106KL-04W-B86 is an 80 mm case fan built with a ball bearing for continuous airflow. It draws 12 V at 0.5 A through a standard 4-pin connector. The 8015 frame measures 80 by 15 mm and suits compact chassis or CPU cooler mounting.

4-pin PWM control and ball bearing

The 4-wire connector enables motherboard speed regulation without extra adapters. Ball bearing construction reduces friction compared with sleeve designs, extending service life in constant-operation scenarios. No LED lighting is included, keeping the appearance neutral for any build.

80 mm frame for tight clearances

The 80 mm square footprint fits small-form-factor cases and low-profile CPU coolers where larger fans cannot install. It delivers targeted airflow for component cooling in restricted volumes. Builders needing higher static pressure or larger diameter fans will need a different solution.

أبرز المميزات

  • Ball bearing for reliable long-term operation
  • 12 V 0.5 A 4-pin PWM control for precise speed regulation
  • 80 mm square frame fits standard 8015 mounting holes
  • Non-LED black design keeps the build clean
  • 15 mm thickness suits slim CPU and case cooling slots

المواصفات

BrandZyvpee
Series3106KL-04W-B86
Model3106KL-04W-B86
TypeCase Fan
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions80*15MM

أسئلة حول هذا المنتج

How long will the ball bearing in the 3106KL-04W-B86 last before it needs replacement?

The ball bearing is rated for extended continuous operation at 12 V 0.5 A; typical service life exceeds several years in a standard case environment.

What limits sustained airflow when the 80 mm 8015 fan runs at full 12 V 0.5 A load?

The 4 W 4-pin connector and motor winding set the current ceiling; once 0.5 A is reached speed and airflow cannot increase further.

How much noise and heat does the 4-pin 80*15 mm fan produce during all-day operation?

At 12 V 0.5 A the motor runs warm to the touch and emits a moderate mechanical hum typical of ball-bearing 80 mm coolers.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.