نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black 80mm square case fan 25mm thick with three wires

Zyvpee

Zyvpee AD0824MS-A70GL 80mm 25mm 3-wire 24V case fan

SKU CH-W3RP-QERFM

An 80 mm case fan with a 25 mm frame, 3-wire connector and sleeve bearing for 24 V inverter cooling

  • TypeCase Fan
  • Bearing Typesleeve
  • Power Connector3 Wires
  • ColorBlack
  • LEDNon-LED
  • FeaturesInverter Cooling
  • 80 mm frame fits standard case mounts
  • 25 mm thickness matches common 8025 slots
  • 24 V DC input suits inverter cooling circuits
  • 1 A draw keeps power demand low
  • 3-wire connector enables speed monitoring

Product Identity

The Zyvpee AD0824MS-A70GL is an 80 mm by 25 mm case fan that runs on 24 V DC and draws 0.1 A through a three-wire connector. It uses a sleeve bearing and has no LED lighting, finished in black. The frame is designed for inverter cooling with a reverse-blowing, variable-frequency airflow pattern.

Who It Suits

This fan fits builders who need an 8025-form-factor cooler that operates from a 24 V supply and can accept a three-wire power lead. The sleeve bearing and non-LED design keep the unit simple for industrial or embedded chassis that specify the AD0824MS-A70GL model. Buyers who require a different supply voltage, a four-pin PWM connector, or a larger frame size should look elsewhere.

Deciding Specification

The defining figure is the 24 V DC rating combined with the 0.1 A draw and three-wire interface; the part will only work in systems that provide exactly that power arrangement.

أبرز المميزات

  • 80 mm frame fits standard case mounts
  • 25 mm thickness matches common 8025 slots
  • 24 V DC input suits inverter cooling circuits
  • 1 A draw keeps power demand low
  • 3-wire connector enables speed monitoring

المواصفات

Brand3ccooler.com
SeriesAD0824MS-A70GL
ModelAD0824MS-A70GL
TypeCase Fan
Bearing Typesleeve
Power Connector3 Wires
ColorBlack
LEDNon-LED
FeaturesInverter Cooling
Dimensions80*25mm

أسئلة حول هذا المنتج

What power source do I need to run the AD0824MS-A70GL fan?

The fan requires a 24 V DC supply capable of at least 0.1 A and a 3-wire header or adapter to deliver power and tachometer signal.

Will the 80 mm frame and 25 mm depth fit in the same mounting holes as my older 8025 fans?

Yes, the 80x25 mm footprint matches the standard 8025 pattern so it will align with existing screw holes.

How can I confirm the fan is spinning at the correct speed after installation?

Connect the third wire to a motherboard or controller that reads RPM; the reported speed should be steady and non-zero while the system is powered.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.