نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black 90mm square case fan with 25mm depth, 3-pin connector, no LED

Zyvpee

Zyvpee AD0912LB-A72GL 90mm 12V 0.13A 3-pin case fan

SKU CH-RH75-W7TZ6

A 90 mm ball-bearing case fan running at 12 V and 0.13 A with a 3-pin connector for CPU cooler compatibility

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • 90 mm frame fits tight chassis spaces
  • 12 V DC motor runs on standard fan headers
  • Ball bearing design extends operational lifespan
  • 13 A draw keeps power consumption low
  • Three-pin connector enables direct motherboard control

Compact 90 mm case fan for targeted airflow

The Zyvpee AD0912LB-A72GL is a 90 mm DC axial fan designed to fit tight mounting points in CPU coolers or small-form-factor chassis. Its 3-pin connector provides simple voltage control without PWM complexity. Ball-bearing construction supports continuous operation in always-on systems.

12 V 0.13 A rating defines its airflow ceiling

At twelve volts and 0.13 amperes the fan delivers modest static pressure suited to low-restriction heatsinks or exhaust duty. The 25 mm thickness and 90 mm frame limit maximum airflow, so it will not satisfy high-TDP coolers or radiators that demand greater cubic-metre-per-minute throughput.

Direct swap for legacy 90 mm three-pin fans

This unit replaces worn or noisy 90 mm ball-bearing fans that use a three-wire header. The upgrade is worthwhile when the original sleeve-bearing motor has developed rattle or when a non-LED black frame is preferred for a cleaner interior aesthetic.

أبرز المميزات

  • 90 mm frame fits tight chassis spaces
  • 12 V DC motor runs on standard fan headers
  • Ball bearing design extends operational lifespan
  • 13 A draw keeps power consumption low
  • Three-pin connector enables direct motherboard control

المواصفات

BrandZyvpee
SeriesAD0912
ModelAD0912LB-A72GL
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC axial fan
Dimensions90 * 25 mm
Package Contentsrefer to title

أسئلة حول هذا المنتج

Will the 90mm frame with 3-pin connector fit my existing CPU cooler mounting holes?

The fan measures 90 by 25 mm and uses a standard 3-pin power connector, matching common 90mm cooler mounting patterns.

How can I confirm the ball bearing is spinning at the correct 12V 0.13A after installation?

Connect the 3-pin header to the motherboard, then check the fan speed reading in BIOS or monitoring software to verify it reports an RPM value.

Does the package include only the bare 90mm fan or are mounting screws also supplied?

The supplier title lists the 90mm AD0912LB-A72GL 12V 0.13A 3-wire 3-pin cooling fan; no extra accessories are mentioned.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.