نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black 90mm square case fan 25mm thick two wire 12V 0.17A sleeve bearing non LED

Zyvpee

Zyvpee AD0912MS-A70GL 9025 12V .17A 2 Wires 90mm case fan

SKU CH-EG50-RKRFX

A 90 mm sleeve-bearing case fan running at 12 V and 0.17 A with a two-wire power connector

  • TypeCase Fan
  • Bearing Typesleeve
  • Power Connector2 Wires
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Fan
  • 12V 0.17A low power draw for efficient cooling
  • 90mm x 25mm compact frame fits tight chassis spaces
  • Sleeve bearing runs quietly during daily use
  • Two-wire connector installs quickly on any 12V header
  • Black non-LED design keeps builds clean and professional

Compact 90 mm sleeve-bearing fan

The Zyvpee AD0912MS-A70GL is a 90 mm square case fan with a 25 mm thickness designed for CPU cooling in small-form-factor builds. It runs on 12 V DC at 0.17 A and uses a sleeve bearing for quiet operation at low speeds. The black frame carries no LED lighting.

Two-wire power only

The fan ships with a simple two-wire lead that delivers constant voltage without PWM speed control or tachometer feedback. This means the motherboard cannot regulate RPM automatically or report fan speed to monitoring software. Builders who need variable speed curves or RPM alerts must add an external controller.

Straightforward screw mounting

Four corner holes accept standard 3 mm screws for direct attachment to a heatsink or case grille. The short two-wire cable reaches nearby headers but may need an extension in larger chassis. Polarity is not keyed, so reversing the wires will stop the fan from spinning until corrected.

أبرز المميزات

  • 12V 0.17A low power draw for efficient cooling
  • 90mm x 25mm compact frame fits tight chassis spaces
  • Sleeve bearing runs quietly during daily use
  • Two-wire connector installs quickly on any 12V header
  • Black non-LED design keeps builds clean and professional

المواصفات

Brand3ccooler.com
SeriesAD0912MS-A70GL
ModelAD0912MS-A70GL
TypeCase Fan
Bearing Typesleeve
Power Connector2 Wires
ColorBlack
LEDNon-LED
FeaturesCPU Fan
Dimensions90*25mm

أسئلة حول هذا المنتج

How often will the sleeve bearing need lubrication or replacement?

The sleeve bearing is sealed and not user-serviceable; plan to replace the fan when noise or vibration increases beyond acceptable levels.

What thermal limit appears first during continuous 12 V operation?

The 0.17 A draw at 12 V sets the steady-state heat output, so motor winding temperature becomes the limiting factor before airflow drops.

How loud does the 90 mm frame get when running all day at 12 V?

With a sleeve bearing and no PWM control, the fan runs at constant speed, producing a consistent low hum that stays steady during extended use.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.