نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Small black square 50x15mm hydraulic case fan with two-pin connector

Zyvpee

Zyvpee AD5012US-D70 50x15mm 12V .21A 2-pin hydraulic case fan

SKU CH-68QC-0ATN2

A 50 mm square, 15 mm thick case fan with hydraulic bearing and 12 V .21 A two-pin power

  • TypeCase Fan
  • Bearing TypeHydraulic
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesDC square Cooler
  • Hydraulic bearing runs quietly for longer life
  • 12 V, .21 A keeps power draw low
  • 50 mm frame fits tight 50 x 15 mm slots
  • Two-pin connector plugs straight into legacy headers
  • Black, non-LED design stays invisible inside the case

Compact 50 mm hydraulic case fan

The Zyvpee AD5012US-D70 is a 50 by 15 millimetre DC fan that runs on 12 volts and draws 0.21 amps. It uses a hydraulic bearing and a two-pin power connector for simple installation. The black, non-LED frame suits standard 5 cm mounting holes in tight chassis.

Suits small-form-factor builds needing a 5 cm

Builders who need a low-profile 12 volt fan for confined spaces will find the 15 millimetre thickness and two-pin connector convenient. Buyers who require PWM speed control or a larger airflow envelope should look at wider or four-pin alternatives instead.

The 0.21 amp current draw at 12 volts decides fit

This single figure determines whether the fan stays within a motherboard header or fan-controller current limit. If the available header cannot supply 0.21 amps continuously, the fan will not spin reliably and a lower-draw model must be chosen.

أبرز المميزات

  • Hydraulic bearing runs quietly for longer life
  • 12 V, .21 A keeps power draw low
  • 50 mm frame fits tight 50 x 15 mm slots
  • Two-pin connector plugs straight into legacy headers
  • Black, non-LED design stays invisible inside the case

المواصفات

SeriesAD5012US-D70
ModelAD5012US-D70
TypeCase Fan
Bearing TypeHydraulic
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions50*50*15mm

أسئلة حول هذا المنتج

How loud and hot does the AD5012US-D70 hydraulic bearing fan run when it operates continuously at 12V 0.21A?

The hydraulic bearing and 12V 0.21A rating keep noise and heat low during all-day use; the 50x15mm frame moves air efficiently without excessive sound or temperature rise.

What power header must my motherboard or controller provide for the 2-pin connector on this 50mm fan?

A standard 12V two-pin fan header supplies the 0.21A this model needs; no PWM or extra wiring is required.

Will the 50x15mm square frame and 2-pin plug work in older cases that only have 3-pin headers or smaller cut-outs?

The 2-pin plug fits onto a 3-pin header by leaving the sense pin empty, and the 50x15mm dimensions match legacy 50mm mounting holes.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.