نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

Zyvpee

Zyvpee AFB0612VHC 60*15mm 4 Pin Case Fan

SKU CH-88CD-G2NSH

A 60 × 15 mm, 12 V, 0.36 A ball-bearing case fan with a 4-pin PWM connector for CPU-cooler mounting

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • 12 V 0.36 A PWM control for precise speed adjustment
  • 60 × 15 mm compact frame fits tight CPU coolers
  • Ball bearing design extends operational lifespan
  • Four-pin connector enables motherboard fan regulation
  • Non-LED black finish suits stealth builds

Compact 60 mm CPU cooler fan

The Zyvpee AFB0612VHC is a 60*15 mm case fan built for CPU cooler mounting. It runs on 12 V at 0.36 A through a 4 pin connector and uses a ball bearing. The black, non-LED frame suits builders who need a small, standard PWM fan for tight cooler clearance.

Straightforward 4 pin installation

The four wire plug fits any standard PWM header on the motherboard or fan controller. Ball bearing construction reduces the risk of sleeve wear but can produce a faint mechanical hum at low speeds. No special tools or adapters are required beyond the supplied screws.

Steady airflow under continuous load

At constant 12 V the fan maintains its rated current draw without thermal throttling. Ball bearings handle sustained rotation better than sleeve types, so airflow stays consistent during long rendering or compile sessions. Acoustic output remains stable rather than rising as the bearing warms.

أبرز المميزات

  • 12 V 0.36 A PWM control for precise speed adjustment
  • 60 × 15 mm compact frame fits tight CPU coolers
  • Ball bearing design extends operational lifespan
  • Four-pin connector enables motherboard fan regulation
  • Non-LED black finish suits stealth builds

المواصفات

BrandZyvpee
SeriesAFB0612VHC
ModelAFB0612VHC
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Fan
Dimensions60*15mm

أسئلة حول هذا المنتج

How can I confirm the 4-pin AFB0612VHC is spinning at the correct speed after installation?

Connect the 4-pin header to the motherboard and monitor the RPM reading in BIOS or fan-control software; the PWM signal will report the actual speed so you can verify it matches the 12 V 0.36 A rating.

What comes with the 60*15 mm AFB0612VHC and what must I purchase separately?

The box contains only the 4-wire ball-bearing fan; mounting screws, fan filters, splitter cables or a fan controller are not included and must be bought separately.

Which version of the AFB0612VHC should I choose for a 60 mm CPU cooler slot?

Select the AFB0612VHC model rated 12 V 0.36 A with a 4-pin PWM connector; it is the only variant listed for the 60*15 mm form factor.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.