نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Small black 30mm square fan with 2-pin connector

Zyvpee

Zyvpee DFB300612H 30mm 12V 1.4W 2-Pin Case Fan

SKU CH-G5QH-BY1E2

Ultra-thin 30 mm ball-bearing fan delivers 12 V 1.4 W cooling for routers, projectors and tight chassis spaces

  • TypeCPU Cooler Fan
  • Fan Size30mm
  • Bearing TypeBall
  • RPM<1600 RPM
  • Power Connector2 Pin
  • ColorBlack
  • Ultra-thin 30 mm profile fits tight router or projector builds
  • Ball bearing rated for continuous operation below 1600 RPM
  • 12 V 1.4 W draw keeps power demand low
  • Two-pin connector simplifies wiring in compact chassis
  • Non-LED black frame avoids light bleed in dark enclosures

Compact 30 mm cooling fan for tight spaces

The Zyvpee DFB300612H is a 30 mm square, 6 mm thick case fan designed for ultra-thin devices such as routers, projectors and small-form-factor enclosures. It runs on 12 V DC and draws 1.4 W, making it suitable for low-power auxiliary cooling.

Check voltage, connector and physical clearance

Verify that your device supplies 12 V DC and accepts a 2-pin power connector before ordering. The housing measures 30 mm by 30 mm with a 6 mm profile, so confirm the mounting holes and internal height match these dimensions.

Ball-bearing motor spins below 1600 RPM

The fan uses a ball bearing for durability and operates at under 1600 RPM, providing chip-level airflow without LED lighting. It requires a 12 V two-pin header or adapter and frees up space in compact builds where larger fans cannot fit.

أبرز المميزات

  • Ultra-thin 30 mm profile fits tight router or projector builds
  • Ball bearing rated for continuous operation below 1600 RPM
  • 12 V 1.4 W draw keeps power demand low
  • Two-pin connector simplifies wiring in compact chassis
  • Non-LED black frame avoids light bleed in dark enclosures

المواصفات

Brand3ccooler.com
SeriesDFB300612H
ModelDFB300612H
TypeCPU Cooler Fan
Fan Size30mm
Bearing TypeBall
RPM<1600 RPM
Power Connector2 Pin
ColorBlack
LEDNon-LED
Featureschips cooling
Dimensions30*06mm

أسئلة حول هذا المنتج

Does the 30mm fan ship with any screws or mounting brackets, or do I need to source those separately?

Only the fan itself is shown in the supplied photos; mounting hardware is not included and must be purchased separately if your chassis does not already provide 30mm screw holes.

The listing mentions a single DFB300612H model — are there alternative voltage or thickness versions I should consider?

The data specifies one 12V, 1.4W unit measuring 30mm by 6mm with a ball bearing and 2-pin connector; no other voltage, power or thickness variants are listed.

With a maximum speed below 1600 RPM, how much airflow can I realistically expect in a tight router or projector enclosure?

At under 1600 RPM the 30mm ball-bearing fan delivers modest airflow suited to chip-level cooling in compact devices such as micro routers or projectors rather than high-volume case ventilation.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.