نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black 92mm square case fan 25mm thick with three wire connector

Zyvpee

Zyvpee DS09225R12MC238 92mm 25mm 12V .3A 3 Pin Ball Bearing Case Fan

SKU CH-J4MM-9YERT

92 mm ball-bearing case fan runs on 12 V at .3 A with a three-pin connector and fits CPU coolers

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • 92 mm frame fits tight build spaces
  • 25 mm thickness suits standard mounting points
  • Ball bearing design extends operational lifespan
  • 12 V .3 A draw keeps power use low
  • Three-pin connector enables motherboard speed control

92 mm DC case fan for CPU coolers

The Zyvpee DS09225R12MC238 is a 92 mm by 25 mm case fan built for CPU cooler compatibility. It runs on a 12 V supply drawing point three amps through a three pin connector. Ball bearing construction supports continuous operation in standard chassis layouts. Non LED black housing keeps the appearance neutral for any build theme.

Ball bearing thermals and low power draw

Ball bearing design reduces friction for steady airflow at the rated twelve volt input. Current draw stays at point three amps, limiting heat contribution inside the case. Three pin power delivery allows voltage based speed control through motherboard headers. The fan targets cooling duty without adding audible bearing noise common in sleeve alternatives.

Fits 92 mm mounts and frees larger slots

The ninety two by twenty five millimetre frame matches standard CPU cooler and rear exhaust mounts. Three pin connector plugs directly into most desktop motherboards without adapters. Using this size leaves one hundred twenty millimetre and one hundred forty millimetre positions open for higher volume intake or radiator fans. Non LED design avoids light bleed in windowed panels.

أبرز المميزات

  • 92 mm frame fits tight build spaces
  • 25 mm thickness suits standard mounting points
  • Ball bearing design extends operational lifespan
  • 12 V .3 A draw keeps power use low
  • Three-pin connector enables motherboard speed control

المواصفات

BrandZyvpee
SeriesDS09225R12MC238
ModelDS09225R12MC238
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC Case Fan
Dimensions92*25mm

أسئلة حول هذا المنتج

How do I install the 92mm DS09225R12MC238 fan and what step is often missed?

Mount the 92*25mm frame with four screws, connect the 3-pin plug to a 12V header, and verify the arrow points toward the heatsink — skipping the airflow check is the common error

What maintenance or replacement will the DS09225R12MC238 ball-bearing fan need later?

The ball bearing is rated for long life; plan to clean dust from the 92mm blades annually and replace the unit only if noise or vibration appears

What limit appears first on the 12V 0.3A DS09225R12MC238 under sustained load?

The 3-pin DC design runs at fixed voltage, so the thermal ceiling of the attached CPU cooler becomes the limiting factor before the fan itself throttles

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.