نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

Zyvpee

Zyvpee FBL08A12L 80mm 12V 0.1A ball bearing case fan

SKU CH-BBBM-3W8S9

80 mm ball-bearing case fan spins below 1600 RPM at 12 V and 0.1 A for CPU cooler or projector cooling

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • RPM<1600 RPM
  • ColorBlack
  • LEDNon-LED
  • Ball bearing for reliable long-term operation
  • 12 V 0.1 A low power draw suits tight power budgets
  • 80 mm × 25 mm fits standard 8 cm mounts
  • Under 1600 RPM keeps acoustic profile modest
  • Non-LED black frame suits stealth builds

Compact 80 mm cooling fan

The Zyvpee FBL08A12L is an 80 mm case fan designed for CPU coolers and projector units such as the CP-X385W. It runs on 12 V at 0.1 A and uses a ball bearing for consistent rotation. Black frame, no LED lighting.

Suited for tight cooler slots and projector chassis

Builders fitting an 80 mm * 25 mm fan onto a compatible CPU cooler or replacing the original projector fan will find the dimensions match. Buyers who need higher airflow, PWM control or LED illumination should look at something else.

Moves air at up to 1600 RPM

The fan spins below 1600 RPM to deliver modest airflow for small heatsinks or projector enclosures. It handles typical low-heat components but runs out of headroom on larger CPUs or multi-GPU setups that demand greater static pressure.

أبرز المميزات

  • Ball bearing for reliable long-term operation
  • 12 V 0.1 A low power draw suits tight power budgets
  • 80 mm × 25 mm fits standard 8 cm mounts
  • Under 1600 RPM keeps acoustic profile modest
  • Non-LED black frame suits stealth builds

المواصفات

BrandZyvpee
SeriesFBL08A12L
ModelFBL08A12L
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
RPM<1600 RPM
ColorBlack
LEDNon-LED
Featuresprojector fan
Dimensions80 * 25 mm
Package Contentsrefer to title

أسئلة حول هذا المنتج

What power connector does the 12V 0.1A fan need to run?

It runs on a standard 12 V supply drawing 0.1 A; match the connector to your board or controller.

Will the 80mm 25mm frame fit the same mounts as my old 80mm fan?

Yes, the 80 mm by 25 mm dimensions follow the common 80 mm mounting pattern.

How do I confirm the ball bearing unit is spinning up to speed?

Listen for smooth rotation and check that RPM stays below 1600 RPM in your monitoring software.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.