نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Small black 60mm case fan, 10mm thick, two-pin connector, no LED

Zyvpee

Zyvpee GM0506PFV2-A G.(9).B325 60x10mm 5V 1.4W 2-pin case fan

SKU CH-7VYG-35PPR

A 60 mm ball-bearing case fan with 2-pin 5 V power runs at 1600-1999 RPM for CPU cooling

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • RPM1600-1999 RPM
  • Power Connector2 Pin
  • ColorBlack
  • Compact 60 mm frame fits tight CPU cooler spaces
  • Ball bearing supports 1600–1999 RPM for steady airflow
  • 5 V 1.4 W draw keeps power load low
  • Two-pin connector enables simple motherboard hookup
  • Non-LED black design suits clean build aesthetics

Compact 60 mm CPU cooler fan

The Zyvpee GM0506PFV2-A is a 60 mm square case fan built for CPU cooler mounting. It runs on a 5 V supply and draws 1.4 W, making it suited to low-power thermal designs. The black frame carries no LED lighting, so it stays visually neutral inside any chassis. Ball bearings provide the rotational support for continuous operation.

Check voltage header and mounting holes

Verify that your motherboard or controller offers a 5 V two-pin header before ordering. The fan uses a two-wire, two-pin connector without PWM signalling, so speed control depends on voltage regulation alone. Confirm the 60 mm by 60 mm hole pattern matches the cooler or bracket you intend to use. Ensure the 10 mm thickness clears surrounding components and side panels.

Fits tight cooler stacks and frees larger slots

The slim 10 mm profile lets the unit sit in compact CPU cooler assemblies where thicker fans would interfere with memory or VRM heatsinks. Its 60 mm footprint occupies minimal surface area, leaving adjacent expansion slots and drive bays unobstructed. The fixed 1600 to 1999 RPM range delivers directed airflow across heatsink fins without needing a four-pin header. This makes it a practical drop-in for space-constrained builds that rely on voltage-controlled cooling.

أبرز المميزات

  • Compact 60 mm frame fits tight CPU cooler spaces
  • Ball bearing supports 1600–1999 RPM for steady airflow
  • 5 V 1.4 W draw keeps power load low
  • Two-pin connector enables simple motherboard hookup
  • Non-LED black design suits clean build aesthetics

المواصفات

BrandZyvpee
SeriesGM0506PFV2-A
ModelGM0506PFV2-A
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
RPM1600-1999 RPM
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions60*10MM

أسئلة حول هذا المنتج

Does the 60 mm by 10 mm fan ship with mounting screws or a power adapter, or must those be purchased separately?

The listing shows only the fan unit itself; mounting screws and any adapter cables are not included and would need to be sourced separately.

The model code includes GM0506PFV2-A G.(9).B325 — what does the 325 signify for choosing between versions?

The 325 appears in the specific model suffix G.(9).B325 and distinguishes this 5 V 1.4 W variant from other voltage or speed configurations in the same series.

With a speed range of 1600 to 1999 RPM on a 2-pin 5 V header, what airflow behaviour should be expected once installed?

The fan will run at a fixed speed within the 1600–1999 RPM band, delivering steady airflow for CPU cooling without PWM control or speed reporting.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.