نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Small black 30mm square cooling fan 10mm thick two wires

Zyvpee

Zyvpee GM1203PFV1-8 30mm 12V 1.0W 2-wire case fan

SKU CH-T6K8-A6B8K

30 mm maglev case fan runs below 1600 RPM at 12 V 1.0 W for compact CPU or drive cooling

  • TypeCPU Cooler Fan
  • Fan Size30mm
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector2 Wires
  • ColorBlack
  • Compact 30 mm frame fits tight spaces
  • Maglev bearing reduces friction for quiet running
  • 12 V 1.0 W design keeps power draw low
  • Two-wire connector enables simple installation
  • Sub-1600 RPM speed balances airflow and noise

Compact 30 mm maglev fan for tight builds

The Zyvpee GM1203PFV1-8 is a 30 mm square, 10 mm thick case fan designed for confined spaces such as small-form-factor chassis, notebook coolers or drive enclosures. It runs on 12 V and draws 1.0 W through a two-wire power lead. The maglev bearing and non-LED black frame keep the unit simple and durable for continuous operation.

Thermals noise and power in normal use

At under 1600 RPM the fan moves a modest amount of air while consuming only 1.0 W from a 12 V rail. The maglev bearing reduces friction, helping to keep acoustic output low during typical workloads. Two-wire power means speed is fixed unless the host provides voltage control, so noise stays consistent once installed.

Replaces stock 30 mm coolers when clearance is

This unit fits the exact 30*10 mm footprint used by many OEM CPU coolers and drive-bay brackets, making it a direct swap for worn or noisy originals. The upgrade is worth it when the original sleeve-bearing fan has developed rattle or when a maglev bearing is preferred for longer service life. Builders needing PWM control, higher static pressure or larger frame sizes should look elsewhere.

أبرز المميزات

  • Compact 30 mm frame fits tight spaces
  • Maglev bearing reduces friction for quiet running
  • 12 V 1.0 W design keeps power draw low
  • Two-wire connector enables simple installation
  • Sub-1600 RPM speed balances airflow and noise

المواصفات

BrandZyvpee
SeriesGM1203PFV1-8
ModelGM1203PFV1-8
TypeCPU Cooler Fan
Fan Size30mm
Bearing TypeMaglev
RPM<1600 RPM
Power Connector2 Wires
ColorBlack
LEDNon-LED
Featuresmini Cooling
Dimensions30*10MM

أسئلة حول هذا المنتج

How do I install the 30 mm maglev fan with its 2-wire 12 V connector, and what step is often missed?

Mount the 30*10 mm frame using the four corner holes, plug the 2-wire lead into a 12 V header, and verify the fan spins up to 1600 RPM — the step often missed is confirming the connector polarity before powering on.

What maintenance or replacement will the maglev bearing need over time?

The maglev bearing runs without physical contact, so no lubrication is required; replacement is only necessary if the fan exceeds its 1.0 W rating or the RPM drops well below 1600 RPM after years of continuous use.

What limit appears first when the fan runs at 12 V continuously?

The 1.0 W power ceiling is reached first, capping the speed at 1600 RPM and preventing higher airflow without exceeding the rated wattage.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.