نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black 60 mm square case fan, 25 mm thick, four-pin connector

Zyvpee

Zyvpee PVA060G12N -P16-AB 6025 12V .55A 4 Pin case fan

SKU CH-CZQP-2ZMPQ

A 60×25 mm ball-bearing fan with a 4-pin connector runs at 12 V and 0.55 A for CPU or server chassis cooling

  • TypeCPU Cooler Fan
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Cooling
  • Ball bearing for long service life
  • 12 V .55 A PWM control for precise speed
  • 60x60x25 mm fits tight chassis
  • 4-pin connector enables motherboard regulation
  • Non-LED black design for clean builds

Compact 60 mm case fan

The Zyvpee PVA060G12N -P16-AB is a 6025 form-factor fan designed for tight chassis spaces. It suits builders who need targeted airflow for CPU coolers or server enclosures. The 4-pin connector allows PWM speed control from the motherboard. Ball-bearing construction supports continuous operation in demanding environments.

Four-pin PWM control limits

The 4-wire interface provides automatic speed regulation based on temperature curves. Voltage is fixed at 12 V and current draw is .55 A. The motherboard header must supply sufficient amperage for the fan to reach full speed. Without PWM support the fan will run at a constant rate determined by the header default.

Cooling headroom for small heatsinks

At 60 by 25 mm the fan fits low-profile coolers and dense server trays where larger units cannot mount. It delivers focused airflow across compact fin stacks typical of 1U or ITX builds. In high-restriction radiators or large tower coolers the static pressure falls short of what those designs require.

أبرز المميزات

  • Ball bearing for long service life
  • 12 V .55 A PWM control for precise speed
  • 60x60x25 mm fits tight chassis
  • 4-pin connector enables motherboard regulation
  • Non-LED black design for clean builds

المواصفات

Brand3ccooler.com
SeriesPVA060G12N
ModelPVA060G12N
TypeCPU Cooler Fan
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions60*25mm

أسئلة حول هذا المنتج

Which 60 mm version of this Zyvpee PVA060G12N -P16-AB fan should I choose for my build?

The listing shows a single 60 mm × 25 mm model with a 4-pin connector, 12 V .55 A rating and ball bearing, so there is no alternative capacity or version to select.

What does the 12 V .55 A rating mean once the fan is installed in a real system?

It draws 0.55 A from the 12 V rail, so the motherboard header must supply at least that current for reliable start-up and PWM control.

How does the 4-pin interface affect speed control in practice?

The fourth pin carries the PWM signal, allowing the motherboard to vary the fan speed dynamically instead of running at a fixed voltage.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.