Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with black memory chips, gold edge connector, no heat spreader

A-Tech

A-Tech 128GB DDR4 2933MHz ECC LRDIMM CL21 1.2V 288-Pin Server RAM

SKU CH-DN3G-ES510

128 GB DDR4 2933 MHz ECC LRDIMM server memory with CL21 latency and 1.2 V operation

  • Capacity128GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • 128 GB capacity handles heavy server workloads
  • DDR4 2933 MHz speed delivers high data throughput
  • ECC load-reduced design protects data integrity
  • 2 V operation reduces power consumption
  • Replaces Fujitsu S26361-F4083-E930, L428, L430, L930 modules

128GB DDR4 2933 ECC LRDIMM

This is a 128GB DDR4 server memory module rated at 2933MHz with CL21 latency. It uses a 288-pin LRDIMM form factor and operates at 1.2V with ECC and load-reduced buffering. The module is built as an equivalent replacement for specific Fujitsu part numbers including S26361-F4083-E930, L428, L430 and L930.

Suits Fujitsu server upgrades

This module suits administrators upgrading compatible Fujitsu servers that require 128GB DDR4 LRDIMM memory. It is not for desktop PCs, workstations or laptops that use standard UDIMM or SODIMM formats. Buyers needing non-ECC, registered RDIMM or lower-capacity modules should look at other product lines.

Check DDR4 LRDIMM support

Before ordering, verify your server motherboard and BIOS support 288-pin DDR4 LRDIMM modules at 2933MHz with 4DRx4/4Rx4 rank configuration. Confirm the maximum memory capacity per slot and total system limit. Ensure the platform accepts 1.2V operation and ECC load-reduced technology for stable operation.

Přednosti

  • 128 GB capacity handles heavy server workloads
  • DDR4 2933 MHz speed delivers high data throughput
  • ECC load-reduced design protects data integrity
  • 2 V operation reduces power consumption
  • Replaces Fujitsu S26361-F4083-E930, L428, L430, L930 modules

Specifikace

BrandA-Tech
SeriesFujitsu RAM Equivalent Replacement Memory
ModelS26361-F4083-E930, S26361-F4083-L428, S26361-F4083-L430, S26361-F4083-L930
Part NumberS26361-F4083-E930, S26361-F4083-L428, S26361-F4083-L430, S26361-F4083-L930
Capacity128GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4DRx4/4Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesEquivalent Replacement for Fujitsu S26361-F4083-E930, S26361-F4083-L428, S26361-F4083-L430, S26361-F4083-L930

Otázky k tomuto produktu

Does my server need a DDR4 288-pin LRDIMM slot to use this 128GB module?

Yes. The module is a 288-pin DDR4 LRDIMM that requires a server motherboard with DDR4 LRDIMM slots and a memory controller that supports load-reduced DIMMs.

Can I mix this 2933MHz CL21 4Rx4 LRDIMM with older DDR4 RDIMMs in the same system?

No. Load-reduced DIMMs use a different electrical interface than standard registered DIMMs, and the 4Rx4 rank structure differs from typical RDIMM ranks, so they cannot be mixed in the same channel or system.

How can I confirm the module is running at 2933MHz with ECC active after installation?

Enter the server BIOS or UEFI and check the memory configuration screen; it should show 2933 MT/s, CL21 timings, 1.2 V, and ECC enabled for the installed 128GB LRDIMM.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.