Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green 240-pin DDR3 DIMMs with black chips, 16GB kit

A-Tech

A-Tech 16GB (2x8GB) DDR3 1333 ECC UDIMM 2Rx8 1.5V 240-Pin Server RAM

SKU CH-RPMV-DJ9GG

A 16 GB dual-channel DDR3 kit with ECC unbuffered DIMMs running at 1333 MHz for servers and workstations

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 16GB (2 x 8GB)

Speed DDR3 1333 (PC3 10600)

  • 16GB dual-channel kit doubles server memory capacity
  • DDR3 1333 MHz speed with CL9 latency accelerates data throughput
  • ECC unbuffered design detects and corrects single-bit errors
  • 2Rx8 dual-rank organisation increases memory density per slot
  • 5V standard voltage ensures broad DDR3 platform compatibility

Server memory upgrade kit

This 16 GB dual-channel kit contains two 8 GB DDR3 1333 ECC UDIMM modules built for servers and workstations. Each stick uses a 2Rx8 dual-rank layout and runs at the standard 1.5 V DDR3 voltage. The 240-pin unbuffered DIMM form factor fits compatible server and workstation platforms only.

DDR3 1333 interface limits

The PC3-10600 standard caps transfer rates at 1333 MT/s and CL9 latency, so bandwidth is fixed by the memory controller of the host system. ECC error correction adds reliability for data integrity but does not increase raw speed beyond the DDR3 1333 specification. Unbuffered modules cannot be mixed with registered DIMMs on the same channel.

ECC unbuffered requirement

Your motherboard must explicitly support DDR3 ECC UDIMM memory; desktop and laptop boards that lack ECC support will not work with these modules. Verify the system manual for qualified memory lists and correct channel population rules before ordering.

Přednosti

  • 16GB dual-channel kit doubles server memory capacity
  • DDR3 1333 MHz speed with CL9 latency accelerates data throughput
  • ECC unbuffered design detects and corrects single-bit errors
  • 2Rx8 dual-rank organisation increases memory density per slot
  • 5V standard voltage ensures broad DDR3 platform compatibility

Specifikace

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 2Rx8 PC3-10600E
Capacity16GB (2 x 8GB)
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Should I pick the 16 GB kit or look for a different capacity?

This kit provides 16 GB total as two 8 GB modules, designed to run in dual-channel mode on servers and workstations that accept DDR3 ECC unbuffered DIMMs.

What does the 1333 MHz rating mean once the modules are installed?

The modules operate at DDR3 1333 (PC3-10600) with CL9 latency at 1.5 V, delivering the rated throughput when the platform supports that speed.

How does the 240-pin DDR3 ECC unbuffered interface limit what I can use this in?

The 240-pin DDR3 ECC UDIMM form factor fits only servers and workstations that specify DDR3 ECC unbuffered memory; it will not work in desktop or laptop boards.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.