Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green rectangular DDR3 server memory module with gold contacts and black chips

A-Tech

A-Tech 16GB DDR3 1066 PC3-8500 ECC RDIMM 4Rx4 Server RAM

SKU CH-9BH9-M0NRC

16GB DDR3 1066 ECC registered server memory module with 4Rx4 organisation for compatible systems

  • Capacity16GB
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB DDR3 capacity expands server memory headroom
  • ECC registered design detects and corrects data errors automatically
  • 1066 MHz PC3-8500 speed matches Hynix HMT42GR7AMR4C-G7 specification
  • 4Rx4 organisation with major-brand chips delivers dense 240-pin module
  • Lifetime warranty and US-based tech support back every unit

16GB DDR3 1066 ECC RDIMM

This is a single 16GB DDR3 1066 (PC3-8500) ECC registered DIMM built with major-brand chips. It runs at 1.50V with CL7 latency and a 4Rx4 organisation on a 240-pin form factor. The module is a direct replacement for Hynix HMT42GR7AMR4C-G7, HMT42GR7BMR4C-G7 and HMT42GR7CMR4C-G7 server memory.

Servers and workstations needing registered ECC DDR3

IT teams maintaining systems that require DDR3 1066 registered ECC modules with a 4Rx4 rank layout will find this part a compatible match. Builders whose platforms need unbuffered UDIMMs, a different rank structure, or a higher or lower DDR3 speed should look elsewhere.

4Rx4 rank organisation

The 4Rx4 rank configuration is the critical spec that decides whether this module works in a given server board; the memory controller must support this exact organisation for the DIMM to be recognised and operate correctly.

Přednosti

  • 16 GB DDR3 capacity expands server memory headroom
  • ECC registered design detects and corrects data errors automatically
  • 1066 MHz PC3-8500 speed matches Hynix HMT42GR7AMR4C-G7 specification
  • 4Rx4 organisation with major-brand chips delivers dense 240-pin module
  • Lifetime warranty and US-based tech support back every unit

Specifikace

BrandA-Tech
Capacity16GB
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Otázky k tomuto produktu

What motherboard slot and voltage does this 240-pin DDR3 RDIMM require to operate?

The module fits a standard 240-pin DDR3 DIMM slot and runs at the JEDEC 1.5 V specification.

Can I mix this 4Rx4 registered ECC module with existing 2Rx4 or 1Rx4 sticks in the same server?

Mixing ranks is possible if the motherboard supports 4Rx4 modules and the total rank count per channel stays within the platform limit.

How do I confirm the module is running at 1066 MHz with ECC active after installation?

Check the BIOS memory information or run a tool such as dmidecode to verify 1066 MT/s speed, CL7 latency and ECC enabled status.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.