Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green 288-pin DDR4 UDIMM module with black memory chips and gold contacts

A-Tech

A-Tech 32GB DDR4 2933 ECC UDIMM 2Rx8 Server Memory

SKU CH-MZ7Z-RY6RC

32 GB DDR4 2933 ECC UDIMM module with CL21 latency and 1.20 V operation for server and workstation upgrades

  • Capacity32GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 32 GB capacity handles heavy server workloads
  • DDR4 2933 MHz speed moves data quickly
  • ECC UDIMM detects and corrects memory errors
  • 2Rx8 dual-rank layout increases memory density
  • 20 V standard voltage keeps power draw low

A-Tech 32GB DDR4 2933 ECC UDIMM

This 32GB DDR4 2933 ECC UDIMM module uses unbuffered 2Rx8 organisation with CL21 latency at 1.20V. It targets server and workstation builders who need error-correcting memory for data integrity in single-module upgrades.

DDR4 2933 speed and 288-pin DIMM form factor

The DDR4 2933 (PC4-23400) interface caps transfer rate at this frequency, so systems limited to lower DDR4 speeds will downclock the module. The 288-pin unbuffered layout fits only slots wired for UDIMM, not registered or load-reduced DIMM sockets.

32GB single-module capacity decides fit

One 32GB stick fills a lone slot, making it the right part when the board has few slots or when the memory controller supports this density per rank. Buyers who need more total capacity per channel or who require registered ECC modules must choose a different specification.

Přednosti

  • 32 GB capacity handles heavy server workloads
  • DDR4 2933 MHz speed moves data quickly
  • ECC UDIMM detects and corrects memory errors
  • 2Rx8 dual-rank layout increases memory density
  • 20 V standard voltage keeps power draw low

Specifikace

BrandA-Tech
Capacity32GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Otázky k tomuto produktu

Should I choose the 32GB single module or look for a smaller capacity kit?

This listing is a single 32GB DDR4 2933 ECC UDIMM module. Select it when your server or workstation has an available 288‑pin slot and the platform supports 32GB per rank.

What does the 2933MHz rating mean once the module is installed in a real server?

The module runs at DDR4 2933MHz (PC4‑23400) with CL21 latency at 1.20V, delivering that transfer rate when the memory controller is configured for the rated speed.

What interface does this ECC UDIMM use and what does it cap in practice?

It uses a standard DDR4 288‑pin UDIMM interface, so the practical ceiling is the platform’s maximum supported DDR4 frequency and per‑slot capacity.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.