Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green 240-pin DDR3 ECC registered DIMM module with black chips

A-Tech

A-Tech 4GB DDR3 1333 ECC RDIMM 2Rx4 for Samsung M393B5170 Server RAM

SKU CH-R5ET-DCGQV

A 4 GB DDR3 1333 MHz registered ECC DIMM for Samsung M393B5170 server memory upgrades

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC registered design protects data integrity in server workloads
  • 4 GB DDR3 1333 MHz module expands memory capacity
  • 240-pin DIMM form factor fits standard server slots
  • 5 V standard voltage ensures broad platform compatibility
  • Replacement for Samsung M393B5170 series part numbers

Server Memory Upgrade

This 4GB DDR3 1333MHz ECC registered DIMM replaces Samsung M393B5170 series modules in compatible servers and workstations. It delivers error-correcting code protection and registered buffering for stable operation in multi-module configurations. The single 4GB stick suits administrators expanding memory capacity on supported platforms.

Build and Connector Details

The module uses a 240-pin DIMM form factor with major-brand chips and a 2Rx4 rank organisation. Registered signalling reduces electrical load on the memory controller while ECC detects and corrects single-bit errors. Standard 1.5V DDR3 voltage ensures compatibility with DDR3 server boards that accept registered memory.

Compatibility Check

Verify that your system supports DDR3 1333MHz PC3-10600 ECC registered DIMMs and accepts 2Rx4 modules before ordering. Confirm the motherboard or server documentation lists the Samsung M393B5170 part numbers as qualified memory. This module is not for desktop boards that require unbuffered non-ECC memory or a different DDR generation.

Přednosti

  • ECC registered design protects data integrity in server workloads
  • 4 GB DDR3 1333 MHz module expands memory capacity
  • 240-pin DIMM form factor fits standard server slots
  • 5 V standard voltage ensures broad platform compatibility
  • Replacement for Samsung M393B5170 series part numbers

Specifikace

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Otázky k tomuto produktu

What speed does the DDR3 1333 ECC RDIMM run at and what bandwidth does that cap in practice?

The module operates at DDR3 1333 MHz, also labelled PC3-10600, which delivers a peak transfer rate of 10600 MB/s in a server or workstation.

What physical slot and pin count does this 240-pin DDR3 DIMM require to fit?

It needs a standard DDR3 DIMM slot with 240 pins; the registered design and 1.5 V voltage match server and workstation boards that accept ECC RDIMM modules.

How is the A-Tech 4GB DDR3 1333 ECC RDIMM installed and what step do people often get wrong?

Power down the system, open the chassis, align the notch on the 240-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the ECC registered memory is detected at the correct speed.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.