Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green PCB DDR3 ECC registered DIMM with black chips and gold contacts

A-Tech

A-Tech 4GB DDR3 1333 ECC RDIMM 2Rx4 Server Memory

SKU CH-SHPN-APPYB

4GB DDR3 1333MHz ECC registered DIMM replacement for Samsung M393B5170GB0-CH9Q9 and M392B5170EM1-CH9 server memory

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data errors in critical server workloads
  • Registered design stabilises signal integrity on multi-module configurations
  • DDR3 1333 MHz speed matches PC3-10600 system requirements
  • 4 GB capacity in a single 240-pin DIMM module
  • Direct replacement for Samsung M393B5170GB0-CH9Q9 and M392B5170EM1-CH9 part numbers

DDR3 ECC RDIMM server module

A 4 GB DDR3 1333 MHz ECC registered DIMM built as a compatible replacement for Samsung M393B5170GB0-CH9Q9 and M392B5170EM1-CH9 modules. It runs at PC3-10600 speed with CL9 latency and standard 1.5 V operation. The 2Rx4 organisation and Samsung chipset suit server and workstation platforms that require registered ECC memory.

Who this suits and who should look elsewhere

Designed for administrators upgrading or repairing servers and workstations that specifically call for DDR3 1333 registered ECC DIMMs. Not for desktop boards that accept only unbuffered non-ECC memory, nor for systems that need a different DDR generation or higher capacities per slot.

The specification that decides fit

The module is a 240-pin DDR3 registered ECC DIMM operating at 1.5 V with 2Rx4 rank configuration; the motherboard must support registered ECC DDR3 at 1333 MHz to use this part.

Přednosti

  • ECC protection prevents data errors in critical server workloads
  • Registered design stabilises signal integrity on multi-module configurations
  • DDR3 1333 MHz speed matches PC3-10600 system requirements
  • 4 GB capacity in a single 240-pin DIMM module
  • Direct replacement for Samsung M393B5170GB0-CH9Q9 and M392B5170EM1-CH9 part numbers

Specifikace

BrandA-Tech
SeriesCompatible Replacement for Samsung
ModelM393B5170GB0-CH9Q9, M392B5170EM1-CH9
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetSamsung Chipset
FeaturesM393B5170GB0-CH9Q9, M392B5170EM1-CH9

Otázky k tomuto produktu

Does this module fit a standard 240-pin DDR3 DIMM slot?

Yes, the stick is a 240-pin DDR3 DIMM designed for server and workstation boards that accept registered ECC memory.

What is the correct seating procedure for the registered ECC module?

Align the notch with the slot key, press down firmly until both retention clips click, and verify the module sits evenly; the registered buffer adds height so extra pressure is often needed.

Will the Samsung chipset on this RDIMM require a firmware update later?

The Samsung chipset is fixed in hardware; no firmware updates apply to the memory module itself.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.