Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green 240-pin DDR3L UDIMM with black memory chips, low-profile circuit board

A-Tech

A-Tech 4GB DDR3L 1333 ECC UDIMM 2Rx8 1.35V Micron MT18KSF51272AZ-1G4 Server Memory

SKU CH-0M22-YXS6T

A 4 GB DDR3L 1333 ECC UDIMM module with 2Rx8 organisation and 1.35 V operation for server memory upgrades

  • Capacity4GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 4GB capacity adds headroom for virtualised workloads
  • DDR3L 1333 speed matches PC3L-10600 server specs
  • ECC UDIMM detects and corrects single-bit errors
  • 35V low voltage reduces power draw in dense racks
  • 2Rx8 240-pin layout fits standard DDR3 DIMM slots

4 GB DDR3L ECC UDIMM for servers

This 4 GB DDR3L ECC UDIMM module operates at 1333 MHz with CL9 latency and runs at 1.35 V. It uses a 2Rx8 organisation with major-brand chips on a 240-pin DIMM. The stick is built as a direct replacement for the Micron MT18KSF51272AZ-1G4 part and is intended for server or workstation systems that require error-correcting unbuffered memory.

Fits DDR3L 240-pin ECC UDIMM slots

The module plugs into any DDR3L 240-pin DIMM socket that accepts unbuffered ECC memory at 1333 MHz. Because it is unbuffered it does not need a registered memory controller, freeing a registered DIMM slot for other configurations. The low 1.35 V voltage reduces power draw compared with standard DDR3, leaving more headroom for other components in the chassis.

Tested replacement with lifetime warranty

Each unit undergoes quality-assurance testing before shipment to verify reliable operation in the target platform. The module is validated as a compatible equivalent for the Micron MT18KSF51272AZ-1G4, simplifying procurement for maintenance or upgrades. A lifetime warranty and US-based technical support are included with the purchase.

Přednosti

  • 4GB capacity adds headroom for virtualised workloads
  • DDR3L 1333 speed matches PC3L-10600 server specs
  • ECC UDIMM detects and corrects single-bit errors
  • 35V low voltage reduces power draw in dense racks
  • 2Rx8 240-pin layout fits standard DDR3 DIMM slots

Specifikace

BrandA-Tech
Capacity4GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Otázky k tomuto produktu

How much power does the 1.35 V DDR3L module draw under continuous load?

The DDR3L 1333 module runs at 1.35 V, lowering power draw and heat output compared with standard 1.5 V DDR3 during all-day operation.

What motherboard slot and chipset support are required for this ECC UDIMM?

You need a DDR3 240-pin UDIMM slot and a chipset that enables ECC on unbuffered memory; the module is a 2Rx8 4 GB kit built with major-brand chips.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.