eshinreal
eshinreal 4 Port Mini PCIe to SATA 3 Expansion Card
- Controller Card
US$ 25,99
0.00033187BTC
Op voorraad
A-Tech
A-Tech 4GB DDR3L 1333 ECC UDIMM 2Rx8 1.35V Micron MT18KSF51272AZ-1G4 Server Memory
A 4 GB DDR3L 1333 ECC UDIMM module with 2Rx8 organisation and 1.35 V operation for server memory upgrades
- Capacity4GB
- SpeedDDR3L 1333 (PC3L 10600)
- CAS LatencyCL9
- Voltage1.35V
- ECCYes
- Buffered/RegisteredUnbuffered
- 4GB capacity adds headroom for virtualised workloads
- DDR3L 1333 speed matches PC3L-10600 server specs
- ECC UDIMM detects and corrects single-bit errors
- 35V low voltage reduces power draw in dense racks
- 2Rx8 240-pin layout fits standard DDR3 DIMM slots
4 GB DDR3L ECC UDIMM for servers
This 4 GB DDR3L ECC UDIMM module operates at 1333 MHz with CL9 latency and runs at 1.35 V. It uses a 2Rx8 organisation with major-brand chips on a 240-pin DIMM. The stick is built as a direct replacement for the Micron MT18KSF51272AZ-1G4 part and is intended for server or workstation systems that require error-correcting unbuffered memory.
Fits DDR3L 240-pin ECC UDIMM slots
The module plugs into any DDR3L 240-pin DIMM socket that accepts unbuffered ECC memory at 1333 MHz. Because it is unbuffered it does not need a registered memory controller, freeing a registered DIMM slot for other configurations. The low 1.35 V voltage reduces power draw compared with standard DDR3, leaving more headroom for other components in the chassis.
Tested replacement with lifetime warranty
Each unit undergoes quality-assurance testing before shipment to verify reliable operation in the target platform. The module is validated as a compatible equivalent for the Micron MT18KSF51272AZ-1G4, simplifying procurement for maintenance or upgrades. A lifetime warranty and US-based technical support are included with the purchase.
Pluspunten
- 4GB capacity adds headroom for virtualised workloads
- DDR3L 1333 speed matches PC3L-10600 server specs
- ECC UDIMM detects and corrects single-bit errors
- 35V low voltage reduces power draw in dense racks
- 2Rx8 240-pin layout fits standard DDR3 DIMM slots
Specificaties
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Vragen over dit artikel
How much power does the 1.35 V DDR3L module draw under continuous load?
The DDR3L 1333 module runs at 1.35 V, lowering power draw and heat output compared with standard 1.5 V DDR3 during all-day operation.
What motherboard slot and chipset support are required for this ECC UDIMM?
You need a DDR3 240-pin UDIMM slot and a chipset that enables ECC on unbuffered memory; the module is a 2Rx8 4 GB kit built with major-brand chips.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
SMUGDESK
SMUGDESK PCIe USB 3.2 Gen 2 Card 10Gbps Type A Type C Type E 19/20Pin
US$ 32,99
0.00042126BTC
Op voorraad
Vszerda
Vszerda UC-087-4P 4-port PCIe x1 to 2 USB 3.0 and 2 USB-C expansion card
US$ 23,99
0.00030633BTC
Op voorraad
Vszerda
Vszerda UC-087-2P 2 Port PCIe x1 to USB-C Expansion Card with 80/120mm Bracket
US$ 21,99
0.0002808BTC
Op voorraad