Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green PCB DDR3L ECC RDIMM module with black chips and gold contacts

A-Tech

A-Tech 4GB DDR3L 1333MHz ECC RDIMM 2Rx4 1.35V for Samsung M392B5170FM0-YH9 Server RAM

SKU CH-JWDC-TKC4A

4GB DDR3L 1333MHz ECC registered server module with 2Rx4 organisation and 1.35V operation

  • Capacity4GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC RDIMM protects server data integrity
  • Registered design stabilises multi-module server loads
  • DDR3L 1.35V reduces power draw and heat
  • 1333MHz CL9 matches Samsung M392B5170FM0-YH9 spec
  • 2Rx4 Samsung chipset ensures validated compatibility

A-Tech 4GB DDR3L 1333MHz ECC RDIMM

This A-Tech module is a 4GB DDR3L 1333MHz ECC Registered DIMM built as a compatible replacement for the Samsung M392B5170FM0-YH9. It operates at 1.35V with CL9 latency and uses a 2Rx4 organisation on a 240-pin DDR3 DIMM form factor. Server and workstation administrators who need to match this exact part number for qualified hardware lists will find the specifications aligned.

Suited for Samsung M392B5170FM0-YH9 replacement

The module fits systems that specifically require the Samsung M392B5170FM0-YH9 part with DDR3L 1333MHz ECC Registered operation at 1.35V. Builders who need a different capacity, a non-ECC unbuffered DIMM, a different voltage such as 1.5V, or a different pin layout such as 262-pin cannot use this module. Compatibility must be verified against the system's qualified vendor list before purchase.

2Rx4 registered ECC at 1.35V decides fit

The single specification that determines whether this is the correct part is the combination of 2Rx4 registered ECC architecture with 1.35V DDR3L voltage at 1333MHz. Systems qualified for the Samsung M392B5170FM0-YH9 require this exact electrical and organisational profile; a module with a different rank structure, voltage, or buffering type will not function in those validated configurations.

Přednosti

  • ECC RDIMM protects server data integrity
  • Registered design stabilises multi-module server loads
  • DDR3L 1.35V reduces power draw and heat
  • 1333MHz CL9 matches Samsung M392B5170FM0-YH9 spec
  • 2Rx4 Samsung chipset ensures validated compatibility

Specifikace

BrandA-Tech
SeriesCompatible Replacement for Samsung
ModelM392B5170FM0-YH9
Capacity4GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetSamsung Chipset
FeaturesM392B5170FM0-YH9

Otázky k tomuto produktu

Will the 240-pin DIMM fit my server's memory slots?

The module uses a standard 240-pin DDR3 DIMM form factor, so it fits any server or workstation slot designed for DDR3 registered memory.

What is the correct way to seat the registered ECC module?

Align the notch with the slot key, press firmly until both retention clips click, and ensure the 1.35V DDR3L voltage matches your platform.

When should I replace this 4GB DDR3L RDIMM?

Replace it if memory diagnostics report uncorrectable ECC errors, the system fails to POST with this module installed, or you upgrade to a higher-capacity kit.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.