Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 4GB DDR4 2400MHz ECC UDIMM 1Rx8 CL17 1.2V Server Memory

SKU CH-QQPC-REH4Y

4GB DDR4 2400MHz ECC unbuffered DIMM with CL17 latency and 1.2V operation for server and workstation upgrades

  • Capacity4GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection prevents data errors in servers
  • 4GB DDR4 2400MHz CL17 1.2V specification
  • Unbuffered UDIMM design for direct CPU access
  • 1Rx8 single-rank Micron chipset architecture
  • 288-pin DIMM form factor fits server boards

Product identity

This is a 4GB DDR4 2400MHz ECC UDIMM built as a compatible replacement for Micron MTA9ASF51272AZ-2G3 and MTA9ASF51272AZ-2G3B1 modules. It targets server and workstation systems that require unbuffered error-correcting memory at standard 1.2V operation.

Compatibility checks

Verify that your platform accepts DDR4 ECC UDIMM modules with a 288-pin interface and supports 2400MHz speed at CL17 latency. Confirm the motherboard or system documentation lists unbuffered ECC DIMMs and 1Rx8 organisation as supported configurations before ordering.

Build integration

The module fits a standard DDR4 DIMM slot and draws 1.2V, leaving headroom within typical server memory power budgets. Its single-rank 1Rx8 layout helps maintain signal integrity on populated channels, while ECC capability protects data integrity for critical workloads.

Přednosti

  • ECC protection prevents data errors in servers
  • 4GB DDR4 2400MHz CL17 1.2V specification
  • Unbuffered UDIMM design for direct CPU access
  • 1Rx8 single-rank Micron chipset architecture
  • 288-pin DIMM form factor fits server boards

Specifikace

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMTA9ASF51272AZ-2G3, MTA9ASF51272AZ-2G3B1
Capacity4GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMicron Chipset
FeaturesMTA9ASF51272AZ-2G3, MTA9ASF51272AZ-2G3B1

Otázky k tomuto produktu

Does the 4GB DDR4 2400MHz ECC UDIMM arrive as a single 288-pin module or do I need to order multiple sticks?

The product is a single 4GB module in a 288-pin DDR4 DIMM form factor; no extra sticks or accessories are included.

The listing mentions Micron MTA9ASF51272AZ-2G3 and MTA9ASF51272AZ-2G3B1 — which version should I pick?

Both part numbers refer to the same 4GB DDR4 2400MHz ECC UDIMM specification; this module is a compatible replacement for either.

What does the PC4-19200 rating tell me about actual throughput in my server?

PC4-19200 is the module's rated peak bandwidth at 2400MHz with CL17 timing and ECC enabled.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.