Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with gold contacts and black memory chips

A-Tech

A-Tech 4GB DDR4 2666MHz DIMM PC4-21300 CL19 1.2V Desktop RAM

SKU CH-QS5Q-0MY35

4GB DDR4 desktop module running at 2666MHz with CL19 latency and 1.2V operation

  • Capacity4GB
  • SpeedDDR4 2666 (PC4 21300)
  • Tested Frequency2666
  • Voltage1.20V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 4GB

Speed DDR4 2666 (PC4 21300)

  • 4GB capacity adds headroom for everyday multitasking
  • DDR4 2666MHz speed delivers responsive data throughput
  • CL19 latency supports smooth application switching
  • 2V operation reduces system power draw
  • 288-pin UDIMM fits standard desktop memory slots

4GB DDR4 2666MHz DIMM for desktop upgrades

This 4GB DDR4 module runs at 2666MHz with a CL19 latency and standard 1.2V operation. It is an unbuffered non-ECC UDIMM built for desktop systems that accept 288-pin DDR4 memory. The single stick adds capacity for everyday computing and multitasking.

Sustained load behaviour at PC4-21300 speed

At the rated 2666MHz frequency the module maintains stable throughput during extended workloads thanks to JEDEC-standard 1.20V voltage. Unbuffered architecture keeps latency predictable at CL19 while the 288-pin DDR4 interface delivers consistent bandwidth without throttling under continuous use.

Straightforward 288-pin installation steps

Align the notch on the 288-pin DIMM with the motherboard slot key and press firmly until the retention clips click into place. The 1.2V DDR4 standard avoids legacy voltage conflicts, but systems limited to lower speeds will downclock the module automatically. Verify the board supports DDR4 2666 before fitting.

Přednosti

  • 4GB capacity adds headroom for everyday multitasking
  • DDR4 2666MHz speed delivers responsive data throughput
  • CL19 latency supports smooth application switching
  • 2V operation reduces system power draw
  • 288-pin UDIMM fits standard desktop memory slots

Specifikace

BrandA-Tech
SeriesA-Tech DDR4 Desktop Memory RAM
Capacity4GB
SpeedDDR4 2666 (PC4 21300)
Tested Frequency2666
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How much heat and power does the 1.2 V DDR4 2666 MHz module draw during all-day use?

The module runs at the standard DDR4 voltage of 1.2 V, so power draw and heat output stay low even under continuous load.

What motherboard slot and memory controller are required for this 288-pin UDIMM to work?

You need a desktop motherboard with a DDR4 DIMM slot and a memory controller that supports 2666 MHz operation.

Will this CL19 2666 MHz stick run stably alongside older DDR4 modules rated at lower speeds?

Yes, the system will clock all modules to the lowest common speed and latency, so the 2666 MHz stick will simply run slower to match.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.