Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Four green DDR4 288-pin RDIMM modules in silver anti-static tray

A-Tech

A-Tech 64GB 4x16GB DDR4 2933 ECC RDIMM 1Rx4 CL21 1.2V server RAM

SKU CH-XPVH-QP0BJ

64 GB quad-channel DDR4 ECC registered kit with four 16 GB single-rank modules at 2933 MHz CL21 1.2 V for servers and workstations

  • Capacity64GB (4 x 16GB)
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 64GB (4 x 16GB)

  • 64 GB capacity from four 16 GB modules
  • ECC RDIMM registered design protects data integrity
  • DDR4 2933 MHz speed accelerates server workloads
  • CL21 latency at 1.2 V standard voltage
  • 288-pin DIMM form factor fits DDR4 server slots

Server DDR4 upgrade kit

This 64 GB kit contains four 16 GB registered DIMMs built for DDR4 servers and workstations. Each module runs at 2933 MHz with CL21 latency at 1.2 V and provides ECC error correction. The single-rank x4 layout supports quad-channel operation on compatible platforms.

Registered ECC constraints

Registered DIMMs with ECC only function in systems designed for DDR4 RDIMM memory; they will not work in standard desktop or laptop motherboards. The 288-pin form factor and registered buffer require matching chipset support and correct channel population rules.

Replaces non-ECC or lower-capacity RDIMMs

The jump is worthwhile when moving from unbuffered memory or smaller registered kits to gain error correction and higher total capacity for virtualization or database workloads. Systems limited to slower DDR4 speeds or fewer channels will not use the full 2933 MHz bandwidth.

Přednosti

  • 64 GB capacity from four 16 GB modules
  • ECC RDIMM registered design protects data integrity
  • DDR4 2933 MHz speed accelerates server workloads
  • CL21 latency at 1.2 V standard voltage
  • 288-pin DIMM form factor fits DDR4 server slots

Specifikace

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 16GB 1Rx4 PC4-2933Y-R
Capacity64GB (4 x 16GB)
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Should I choose the 4 x 16 GB kit or a different capacity for my server?

This kit provides 64 GB total across four 16 GB modules, designed for quad-channel server and workstation platforms that support DDR4 registered ECC memory.

What does the 2933 MHz rating mean once the modules are installed?

The modules run at DDR4 2933 (PC4-23400) with CL21 latency at 1.2 V, delivering the rated throughput when the platform enables the matching memory controller speed.

How does the DDR4 288-pin RDIMM interface limit performance in practice?

The registered 288-pin DDR4 interface caps operation to the platform's maximum supported DDR4 speed and requires a server or workstation motherboard that accepts registered ECC DIMMs.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.