Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green rectangular DDR3 DIMM with black chips and gold contacts

A-Tech

A-Tech 8GB DDR3 1333MHz ECC RDIMM 2Rx4 Server Memory

SKU CH-TBCG-2H3J9

8GB DDR3 1333MHz ECC registered DIMM with 2Rx4 organisation for compatible HP servers

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server memory for heavier workloads
  • DDR3 1333MHz PC3-10600 speed matches system bus timing
  • ECC registered design detects and corrects data errors
  • 2Rx4 rank layout fits dense DIMM slots
  • 5V standard voltage ensures stable power draw

8GB DDR3 ECC RDIMM for servers

This 8GB DDR3 module runs at 1333MHz with CL9 latency and 1.50V operation. It is a registered ECC DIMM built with major-brand chips for dependable server and workstation performance. The 2Rx4 organisation suits multi-socket platforms that require registered memory. Buyers who need unbuffered or non-ECC modules should look elsewhere.

Registered ECC with 2Rx4 organisation

The single specification that decides fit is the registered ECC design with a 2Rx4 rank configuration. Only systems that explicitly support DDR3 RDIMMs at PC3-10600 speed can use this module. Desktop boards and consumer laptops that accept only unbuffered non-ECC memory will not recognise it.

240-pin DDR3 DIMM slot required

Installation requires an available 240-pin DDR3 DIMM slot on a motherboard qualified for registered ECC memory. The module frees a slot for future expansion while adding 8GB of error-correcting capacity. Systems limited to unbuffered memory or a different DDR generation cannot accept this part.

Přednosti

  • 8GB capacity expands server memory for heavier workloads
  • DDR3 1333MHz PC3-10600 speed matches system bus timing
  • ECC registered design detects and corrects data errors
  • 2Rx4 rank layout fits dense DIMM slots
  • 5V standard voltage ensures stable power draw

Specifikace

BrandA-Tech
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Otázky k tomuto produktu

How does the 1333 MHz DDR3 speed translate once the module is installed in a server?

The module runs at the standard DDR3-1333 data rate (PC3-10600) with CL9 latency and 1.5 V, so the server’s memory controller will negotiate that frequency automatically if the platform supports DDR3 registered DIMMs.

What does the registered ECC RDIMM interface mean for compatibility and bandwidth limits?

The 240-pin RDIMM uses a register to buffer address and command signals and includes ECC for single-bit error correction; it only works in chipsets that support registered DDR3 memory and will not fit or function in unbuffered desktop slots.

What physical slot and clearance does the 240-pin DIMM require?

It needs a standard DDR3 240-pin DIMM socket with the key notch in the registered position; the module height follows the JEDEC RDIMM profile, so verify that your server’s DIMM spacing and heatsink clearance can accommodate a full-height registered stick.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.