Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green 240-pin DDR3 registered DIMM with black chips and gold contacts

A-Tech

A-Tech 8GB DDR3 1333MHz PC3-10600 ECC RDIMM 2Rx4 Server Memory for IBM-Lenovo 0A89412 43X5056 46C7449

SKU CH-HYG9-FY4ZT

8GB DDR3 1333MHz ECC registered DIMM with 2Rx4 organisation for IBM-Lenovo servers

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server memory for heavier workloads
  • DDR3 1333MHz speed matches PC3-10600 system requirements
  • ECC RDIMM registered design detects and corrects data errors
  • 2Rx4 dual-rank layout increases memory density per slot
  • 50V standard voltage ensures broad DDR3 platform compatibility

Server memory upgrade for IBM-Lenovo systems

This 8 GB DDR3 registered DIMM runs at 1333 MHz (PC3-10600) with CL9 latency and 1.50 V operation. It uses a 2Rx4 organisation and major-brand chips to provide ECC error correction for compatible servers and workstations. The 240-pin module replaces IBM-Lenovo part numbers 0A89412, 43X5056 and 46C7449.

Sustained load behaviour with ECC registered design

The registered buffer reduces electrical load on the memory controller, helping maintain signal integrity during continuous workloads. ECC circuitry detects and corrects single-bit errors on the fly, preventing data corruption over long runs. Major-brand chips are tested to meet server-grade reliability standards for 24/7 operation.

Thermals noise and power draw in normal use

Standard 1.50 V DDR3 voltage keeps power consumption within typical registered DIMM limits for this speed class. Passive cooling relies on chassis airflow; no moving parts are present on the module itself. The registered design adds minimal latency overhead while contributing to stable operation in densely populated memory slots.

Přednosti

  • 8GB capacity expands server memory for heavier workloads
  • DDR3 1333MHz speed matches PC3-10600 system requirements
  • ECC RDIMM registered design detects and corrects data errors
  • 2Rx4 dual-rank layout increases memory density per slot
  • 50V standard voltage ensures broad DDR3 platform compatibility

Specifikace

BrandA-Tech
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Otázky k tomuto produktu

How much heat and power does this 1.50V DDR3 1333MHz registered module add when running continuously in a server?

At the standard 1.50V DDR3 voltage this 8GB registered DIMM draws typical DDR3 power and produces normal operating heat for a 1333MHz module; registered buffering adds slight load on the memory controller but no extra voltage is required.

What motherboard slot and system support are needed to install this 240-pin ECC RDIMM?

You need a server or workstation board with DDR3 240-pin DIMM slots that accept registered ECC memory and support PC3-10600 speed; the system BIOS must also enable ECC and registered operation.

Will this CL9 1333MHz registered stick work in a system that currently runs CL9 1333MHz unbuffered ECC modules?

No, registered and unbuffered ECC DIMMs cannot be mixed; the memory controller must be configured for registered operation, so all slots must use registered modules like this one.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.