Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

A-Tech

A-Tech 8GB DDR3 1600 ECC RDIMM 2Rx8 for Micron MT18JSF1G72PDZ Server Memory

SKU CH-QCWR-N08VS

An 8 GB DDR3 1600 ECC registered DIMM with 2Rx8 organisation for Micron-compatible servers

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server memory headroom
  • DDR3 1600 PC3-12800 speed supports demanding workloads
  • ECC RDIMM technology protects data integrity
  • Registered 2Rx8 design stabilises multi-module configurations
  • 50V standard voltage ensures broad platform compatibility

8GB DDR3 1600 ECC RDIMM Server Module

This 8GB DDR3 module runs at 1600 MHz with PC3-12800 bandwidth and CL11 latency. It operates at 1.5V and uses a registered 2Rx8 layout with ECC for data integrity. The 240-pin DIMM is built as a compatible replacement for specific Micron part numbers.

Suits servers and workstations needing registered

This module fits systems that require DDR3 RDIMMs with 2Rx8 organisation and 1.5V operation. It is not for platforms that accept only unbuffered UDIMMs or that run DDR3 at a different voltage. Buyers who need higher densities or a different rank configuration should look at other modules.

Registered 2Rx8 ECC architecture decides

The single specification that determines fit is the registered 2Rx8 ECC design on a 240-pin DDR3 interface. Only motherboards qualified for RDIMM with this rank structure and 1.5V DDR3 1600 support will accept the module.

Přednosti

  • 8GB capacity expands server memory headroom
  • DDR3 1600 PC3-12800 speed supports demanding workloads
  • ECC RDIMM technology protects data integrity
  • Registered 2Rx8 design stabilises multi-module configurations
  • 50V standard voltage ensures broad platform compatibility

Specifikace

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT18JSF1G72PDZ-1G6E1FE, MT18JSF1G72PDZ-1G6E1FF, MT18JSF1G72PDZ-1G6E1FG, MT18JSF1G72PDZ-1G6E1FI, MT18JSF1G72PDZ-1G6E1HE
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMicron Chipset
FeaturesMT18JSF1G72PDZ-1G6E1FE, MT18JSF1G72PDZ-1G6E1FF, MT18JSF1G72PDZ-1G6E1FG, MT18JSF1G72PDZ-1G6E1FI, MT18JSF1G72PDZ-1G6E1HE

Otázky k tomuto produktu

How often will the 2Rx8 registered ECC chips need replacement in a 24/7 server?

The DDR3 1600 ECC RDIMM uses Micron chipset components rated for continuous server workloads; no scheduled chip replacement is required under normal operating conditions.

What limit appears first when the 8 GB module runs at 1.50 V continuously?

Sustained operation at 1.50 V is within the DDR3 standard voltage range; the first practical limit is the 8 GB capacity ceiling, not thermal or voltage headroom.

How much heat and power does the 240-pin DDR3 1600 RDIMM produce under all-day load?

At 1.50 V the module draws standard DDR3 power for an 8 GB 2Rx8 registered DIMM; heat output matches typical server memory thermal profiles.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.