Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green bare circuit board with black memory chips and gold 240-pin edge connector

A-Tech

A-Tech 8GB DDR3 1600MHz CL11 Desktop RAM for Mushkin 997031E 997069S

SKU CH-Q1TD-59CDR

An 8 GB DDR3 1600 MHz CL11 desktop DIMM built as a compatible replacement for Mushkin 997031E and 997069S

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • Tested Frequency1600
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCNo
  • 8 GB capacity expands multitasking headroom for desktop workloads
  • DDR3 1600 MHz speed matches PC3-12800 bandwidth rating
  • CL11 CAS latency at 1.5 V standard voltage
  • 240-pin DIMM form factor fits compatible desktop slots
  • Tested replacement for Mushkin 997031E and 997069S modules

Compatible DDR3 Replacement

This A-Tech module is an 8GB DDR3 1600MHz desktop DIMM built to replace Mushkin parts 997031E and 997069S. It runs at PC3-12800 speed with CL11 latency and standard 1.5V operation. The unbuffered non-ECC design suits typical desktop motherboards that accept DDR3 memory.

Straightforward DIMM Installation

Align the notch on the 240-pin module with the slot key and press firmly until the retention clips click into place. The process requires no tools or configuration changes in most systems. Issues usually arise when the motherboard does not support the density of an 8GB single-rank stick or when the slot is dusty, preventing full contact.

DDR3 Platform Constraints

DDR3 memory tops out at the 1600MHz JEDEC standard used here, so faster speeds require manual overclocking that the platform may not sustain. The 1.5V voltage is fixed for this generation and cannot be lowered for power saving. Maximum total capacity is limited by the number of DIMM slots and the memory controller built into the processor or chipset.

Přednosti

  • 8 GB capacity expands multitasking headroom for desktop workloads
  • DDR3 1600 MHz speed matches PC3-12800 bandwidth rating
  • CL11 CAS latency at 1.5 V standard voltage
  • 240-pin DIMM form factor fits compatible desktop slots
  • Tested replacement for Mushkin 997031E and 997069S modules

Specifikace

BrandA-Tech
SeriesCompatible Replacement for Mushkin
Model997031E, 997069S
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
Tested Frequency1600
CAS LatencyCL11
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
Features997031E, 997069S
Recommend UseCompatible Replacement for Mushkin 997031E, 997069S

Otázky k tomuto produktu

How can I verify the module is running at the rated 1600 MHz with CL11 timings after installation?

Open the BIOS or a tool such as CPU-Z and confirm the memory frequency reads 1600 MHz and the CAS latency shows 11 cycles.

What does the package contain and is any extra hardware required?

The box includes a single 8 GB DDR3 DIMM; no additional cables, brackets or heat spreaders are needed for installation.

Which version should I choose if my system calls for Mushkin part numbers 997031E or 997069S?

This module is a direct compatible replacement for both Mushkin 997031E and 997069S, so select this 8 GB DDR3 1600 MHz CL11 kit.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.