SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00504479BTC
재고 있음
A-Tech
A-Tech 8GB DDR3 1600MHz CL11 Desktop RAM for Mushkin 997031E 997069S
An 8 GB DDR3 1600 MHz CL11 desktop DIMM built as a compatible replacement for Mushkin 997031E and 997069S
- Capacity8GB
- SpeedDDR3 1600 (PC3 12800)
- Tested Frequency1600
- CAS LatencyCL11
- Voltage1.50V
- ECCNo
- 8 GB capacity expands multitasking headroom for desktop workloads
- DDR3 1600 MHz speed matches PC3-12800 bandwidth rating
- CL11 CAS latency at 1.5 V standard voltage
- 240-pin DIMM form factor fits compatible desktop slots
- Tested replacement for Mushkin 997031E and 997069S modules
Compatible DDR3 Replacement
This A-Tech module is an 8GB DDR3 1600MHz desktop DIMM built to replace Mushkin parts 997031E and 997069S. It runs at PC3-12800 speed with CL11 latency and standard 1.5V operation. The unbuffered non-ECC design suits typical desktop motherboards that accept DDR3 memory.
Straightforward DIMM Installation
Align the notch on the 240-pin module with the slot key and press firmly until the retention clips click into place. The process requires no tools or configuration changes in most systems. Issues usually arise when the motherboard does not support the density of an 8GB single-rank stick or when the slot is dusty, preventing full contact.
DDR3 Platform Constraints
DDR3 memory tops out at the 1600MHz JEDEC standard used here, so faster speeds require manual overclocking that the platform may not sustain. The 1.5V voltage is fixed for this generation and cannot be lowered for power saving. Maximum total capacity is limited by the number of DIMM slots and the memory controller built into the processor or chipset.
주요 특징
- 8 GB capacity expands multitasking headroom for desktop workloads
- DDR3 1600 MHz speed matches PC3-12800 bandwidth rating
- CL11 CAS latency at 1.5 V standard voltage
- 240-pin DIMM form factor fits compatible desktop slots
- Tested replacement for Mushkin 997031E and 997069S modules
사양
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Mushkin |
| Model | 997031E, 997069S |
| Capacity | 8GB |
| Speed | DDR3 1600 (PC3 12800) |
| Tested Frequency | 1600 |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | 997031E, 997069S |
| Recommend Use | Compatible Replacement for Mushkin 997031E, 997069S |
이 상품에 대한 질문
How can I verify the module is running at the rated 1600 MHz with CL11 timings after installation?
Open the BIOS or a tool such as CPU-Z and confirm the memory frequency reads 1600 MHz and the CAS latency shows 11 cycles.
What does the package contain and is any extra hardware required?
The box includes a single 8 GB DDR3 DIMM; no additional cables, brackets or heat spreaders are needed for installation.
Which version should I choose if my system calls for Mushkin part numbers 997031E or 997069S?
This module is a direct compatible replacement for both Mushkin 997031E and 997069S, so select this 8 GB DDR3 1600 MHz CL11 kit.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
