Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Six green DDR4 RDIMM modules in a row

A-Tech

A-Tech 96GB (6x16GB) DDR4 2133 ECC RDIMM 2Rx4 CL15 1.2V memory upgrade

SKU CH-QGJP-XQ1FV

A 96 GB DDR4-2133 ECC RDIMM kit of six 16 GB modules for Dell PowerEdge 13th-generation rack servers

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes

Capacity 96GB (6 x 16GB)

Zobrazit dalších 4 konfigurací

Speed DDR4 2133 (PC4 17000)

  • Boosts server responsiveness with 96GB capacity across six 16GB modules
  • ECC registered design protects data integrity for Dell PowerEdge 13th Gen rack servers
  • DDR4 2133MHz speed at CL15 latency keeps workloads moving smoothly
  • 2V low-voltage operation reduces power draw in compatible R430 through R930 systems
  • 288-pin 2Rx4 registered DIMMs install directly into validated Dell PowerEdge platforms

96GB DDR4-2133 ECC RDIMM Kit

This 96GB kit contains six 16GB DDR4-2133 registered DIMMs built for Dell PowerEdge 13th Generation rack servers. It targets administrators who need to expand memory capacity on supported R430, R530, R630, R730, R730xd, R830 or R930 platforms.

Registered 2Rx4 Modules Without Heat Spreaders

Each 288-pin module uses a 2Rx4 organisation and runs at 1.20V with CL15 latency. The registered design adds a buffer that reduces electrical load on the server memory controller, while the absence of heat spreaders keeps the profile low for dense chassis layouts.

Replaces Lower-Capacity or Mixed-Speed Kits

Installing this uniform 96GB set removes mismatched speeds that would otherwise force the system to run at the slowest module. The upgrade is worthwhile when workloads demand more memory than the current configuration provides and the server model appears in the supported list.

Přednosti

  • Boosts server responsiveness with 96GB capacity across six 16GB modules
  • ECC registered design protects data integrity for Dell PowerEdge 13th Gen rack servers
  • DDR4 2133MHz speed at CL15 latency keeps workloads moving smoothly
  • 2V low-voltage operation reduces power draw in compatible R430 through R930 systems
  • 288-pin 2Rx4 registered DIMMs install directly into validated Dell PowerEdge platforms

Specifikace

BrandA-Tech
Series13th Gen Dell PowerEdge Rack Server Compatible
Model96GB (6x16GB) 2Rx4 DDR4-2133 RDIMM for Dell PowerEdge R430, R530, R630, R630 XL, R730, R730 XL, R730xd, R730xd XL, R830, R930
Part NumberNE-MS-0059
Capacity96GB (6 x 16GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell PowerEdge R430, R530, R630, R630 XL, R730, R730 XL, R730xd, R730xd XL, R830, R930 | 13th Gen Rack Servers
OptionCompatible with Dell PowerEdge R430, R530, R630, R630 XL, R730, R730 XL, R730xd, R730xd XL, R830, R930
FeaturesDesigned for Dell PowerEdge R430, R530, R630, R630 XL, R730, R730 XL, R730xd, R730xd XL, R830, R930
Package ContentSix Modules

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What DDR4 standard and speed does this 96GB kit run at, and what bandwidth ceiling does that set?

The modules are DDR4 2133 PC4-17000, so the memory bus tops out at 17000 MB/s per channel.

What physical slot and module count are required to install this 6x16GB kit?

It uses six 288-pin DDR4 DIMM slots; the server must have at least six free slots to take the full kit.

How do you seat these registered ECC modules correctly, and what sequencing mistake do installers make?

Align the notch, press straight down until both clips lock, then follow the server manual's channel population order — skipping the prescribed sequence is the common error.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.