Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black flatbed duplicator with nine open SATA slots for 2.5 and 3.5 drives

Acumen Disc

Acumen Disc AD09-OP300 1-to-9 SATA Hard Drive Duplicator 300MB/s

SKU CH-R8HQ-9TYDF

Standalone duplicator copies up to 9 SATA 3.5" or 2.5" drives at 300 MB/s and offers seven DoD-compliant erase modes

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • ConnectorSATA
  • Target1 to 9
  • Buffer Memory128M

Target 1 to 9

Data Transfer Rate 300MB/s

  • Copies up to 9 drives simultaneously at 300MB/s
  • Two copy modes: quick file copy or full sector clone
  • Seven erase modes including DoD 5220.22-M 3-pass and 7-pass
  • Works with 2.5" and 3.5" SATA drives without adapters
  • Standalone operation with 128MB buffer, no host PC required

Standalone SATA duplicator with nine targets

The Acumen Disc AD09-OP300 copies up to nine SATA hard drives or solid-state drives at once. It operates without a host computer, so no software installation or network connection is required. A 128 MB buffer and Athena controller keep each slot running at 300 MB/s. The unit accepts both 2.5" and 3.5" drives directly, with no trays or adapters needed.

IT departments and forensic labs needing secure

The seven erase modes include DoD 3-pass and DoD 7-pass methods that meet 5220.22-M standards, plus Secure Erase and Enhanced SSD Erase for regulatory compliance. Quick Copy and Full Copy modes handle system files or whole media. Buyers who need to duplicate more than nine drives simultaneously, or who require interfaces other than SATA, should look at other equipment.

Duplicates nine SATA drives at 300 MB/s per slot

The single specification that decides fit is the nine-target, 300 MB/s SATA throughput. If the workflow demands nine concurrent copies at that speed, this duplicator matches it; if the job needs higher bandwidth or a different interface, it does not.

Přednosti

  • Copies up to 9 drives simultaneously at 300MB/s
  • Two copy modes: quick file copy or full sector clone
  • Seven erase modes including DoD 5220.22-M 3-pass and 7-pass
  • Works with 2.5" and 3.5" SATA drives without adapters
  • Standalone operation with 128MB buffer, no host PC required

Specifikace

BrandAcumen Disc
TypeHard Drive Duplicator
ModelAcumen Disc HDD Flatbed
Part NumberAD09-OP300
Panel ColorBlack
Operating TypeStandalone
ConnectorSATA
Target1 to 9
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate300MB/s
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

Další verze tohoto modelu

Dalších 4 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Should I pick the 1-to-9 target model or a smaller duplicator?

This unit copies up to 9 SATA drives at once; choose it when you need to clone many 3.5" or 2.5" drives in a single run.

What does the 300 MB/s rate mean when I am actually copying drives?

Each slot can sustain up to 300 MB/s, so a full 1 TB drive finishes in roughly an hour under ideal conditions.

The duplicator uses SATA — what speed ceiling does that impose?

The SATA interface caps each port at 300 MB/s, matching the duplicator's stated maximum transfer rate.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.