Acumen Disc AD04-OP300 1-to-4 Flatbed Hard Drive Duplicator
- Hard Drive Duplicat…
- Black
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Acumen Disc
Standalone duplicator copies up to 9 SATA 3.5" or 2.5" drives at 300 MB/s and offers seven DoD-compliant erase modes
Data Transfer Rate 300MB/s
The Acumen Disc AD09-OP300 copies up to nine SATA hard drives or solid-state drives at once. It operates without a host computer, so no software installation or network connection is required. A 128 MB buffer and Athena controller keep each slot running at 300 MB/s. The unit accepts both 2.5" and 3.5" drives directly, with no trays or adapters needed.
The seven erase modes include DoD 3-pass and DoD 7-pass methods that meet 5220.22-M standards, plus Secure Erase and Enhanced SSD Erase for regulatory compliance. Quick Copy and Full Copy modes handle system files or whole media. Buyers who need to duplicate more than nine drives simultaneously, or who require interfaces other than SATA, should look at other equipment.
The single specification that decides fit is the nine-target, 300 MB/s SATA throughput. If the workflow demands nine concurrent copies at that speed, this duplicator matches it; if the job needs higher bandwidth or a different interface, it does not.
| Brand | Acumen Disc |
|---|---|
| Type | Hard Drive Duplicator |
| Model | Acumen Disc HDD Flatbed |
| Part Number | AD09-OP300 |
| Panel Color | Black |
| Operating Type | Standalone |
| Connector | SATA |
| Target | 1 to 9 |
| Buffer Memory | 128M |
| Controller | Athena Controller |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drives |
| Data Transfer Rate | 300MB/s |
| Load Type | Slot |
| Power Supply | AC: 115-230 V, 50/60 Hz |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
This unit copies up to 9 SATA drives at once; choose it when you need to clone many 3.5" or 2.5" drives in a single run.
Each slot can sustain up to 300 MB/s, so a full 1 TB drive finishes in roughly an hour under ideal conditions.
The SATA interface caps each port at 300 MB/s, matching the duplicator's stated maximum transfer rate.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟