Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Rectangular metal mining unit, matte grey finish, four front fans, Ethernet port visible, 195 by 290 by 400 millimetres

AFRNDK

AFRNDK Antminer E9 Pro 3480M 2200W mining hardware

SKU CH-JBPK-0FATM

Mines EtHash coins at 3.48 Gh/s while drawing 2200 W, runs on 176–264 V, and fits in a 195 x 290 x 400 mm chassis with four fans rated at 85 dB

  • Compatible CurrencyETC
  • Hashrate3480M
  • Noise level85dB
  • Power Consumption2200W
  • 48 Gh/s EtHash hashrate for high ETC yield
  • 2200 W draw keeps electricity cost predictable
  • 5 – 45 °C operating range suits varied climates
  • Four fans and 85 dB noise for managed thermals
  • 195 × 290 × 400 mm frame fits standard racks

Ethash Miner for ETC and ETHW

The AFRNDK Antminer E9 Pro delivers a hashrate of 3480M on the Ethash algorithm, targeting miners focused on ETC and ETHW. It draws 2200W of power and includes a compatible power supply. The unit operates on an input voltage range of 176-264V and requires a 220V supply to avoid damage.

Rack-Scale Build with Four Fans

The chassis measures 195 x 290 x 400mm and weighs 14.2 kg, making it a dense unit for shelf or rack mounting. Four internal fans maintain an operating temperature window of 5 to 45 °C while producing a noise level of 85dB. A single Ethernet port provides the network link for pool connectivity and remote management.

Step Up from Lower Hashrate Rigs

Replacing older GPU arrays or earlier ASICs with this 3.48Gh/s device consolidates hash power into a single 2200W enclosure. The jump is worthwhile when electricity costs allow the higher density to offset the 85dB acoustic profile and 220V infrastructure requirement.

Přednosti

  • 48 Gh/s EtHash hashrate for high ETC yield
  • 2200 W draw keeps electricity cost predictable
  • 5 – 45 °C operating range suits varied climates
  • Four fans and 85 dB noise for managed thermals
  • 195 × 290 × 400 mm frame fits standard racks

Specifikace

BrandANTMINER
ModelE9 PRO
Compatible CurrencyETC
Hashrate3480M
Noise level85dB
Power Consumption2200W

Otázky k tomuto produktu

What Ethernet standard does the Antminer E9 Pro use and what practical limit does it impose?

The miner uses a standard Ethernet interface for pool connectivity; bandwidth is not a bottleneck for the 3.48 Gh/s hashrate.

What physical space and mounting provisions does the 195 x 290 x 400 mm, 14.2 kg unit need?

It requires a shelf or rack bay at least 400 mm deep and 290 mm wide that can support 14.2 kg; four integrated fans exhaust rearward so rear clearance is essential.

How is the Antminer E9 Pro installed and which step is most often done wrong?

Connect Ethernet, attach the included power supply to a 176–264 V circuit, then power on; the common mistake is feeding the wrong voltage instead of the required 220 V nominal.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.