Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Rectangular silver metal mining unit with four fans on one side, compact industrial design

AFRNDK

AFRNDK Antminer KS5 Pro Best Powerful 21TH/s 3150W mining hardware

SKU CH-TWH2-EV744

Bitmain Antminer KS5 Pro mines Kaspa at 21 TH/s using 3150 W with four high-speed fans for cooling

  • TypeMining Machine/Miner
  • Crypto AlgorithmKHeavyhash
  • Compatible CurrencyKaspa
  • Mining HardwareASIC
  • Hashrate21TH/S
  • Power Consumption3150W
  • Efficient Kaspa mining with 21 TH/s KHeavyhash performance
  • 3150 W power draw for high-density operations
  • Four high-speed fans deliver instant heat dissipation
  • Compact 430 × 195 × 290 mm form fits standard racks
  • 220–277 V input range protects hardware from voltage damage

Kaspa ASIC Miner for KHeavyhash

The AFRNDK Antminer KS5 Pro is an ASIC mining machine built for the KHeavyhash algorithm used by Kaspa. It delivers a hashrate of 21TH/s while drawing 3150W of power. The unit was released by Bitmain in 2024 and requires an input voltage between 220 and 277 volts.

Suited for dedicated Kaspa mining operations

This hardware targets operators who mine Kaspa exclusively and have access to 220-277V power infrastructure. It is not suitable for mining other algorithms or currencies. Buyers without the required high-voltage supply or adequate cooling for 3150W heat output should consider different equipment.

21TH/s hashrate at 3150W power draw

The ratio of 21TH/s to 3150W determines the machine’s energy efficiency and daily operating cost. This single figure decides whether the miner fits a specific electricity rate and profitability target. No other specification overrides this relationship for Kaspa mining.

Přednosti

  • Efficient Kaspa mining with 21 TH/s KHeavyhash performance
  • 3150 W power draw for high-density operations
  • Four high-speed fans deliver instant heat dissipation
  • Compact 430 × 195 × 290 mm form fits standard racks
  • 220–277 V input range protects hardware from voltage damage

Specifikace

BrandANTMINER
SeriesKS5PRO
ModelKS5PRO
TypeMining Machine/Miner
Crypto AlgorithmKHeavyhash
Compatible CurrencyKaspa
Mining HardwareASIC
Hashrate21TH/S
Power Consumption3150W

Otázky k tomuto produktu

What power supply voltage must my site provide for the Antminer KS5 Pro 21Th/s to operate?

The unit requires an input voltage between 220V and 277V; supplying voltage outside this range may damage the miner.

Will the KS5 Pro's 3150W draw and four high-speed fans work reliably on the same 220V-277V circuit as my older ASIC miners?

Yes, as long as the circuit and PDU are rated for the combined amperage of all connected units at 220V-277V, the KS5 Pro will run alongside older hardware on the same voltage supply.

After powering on the KS5 Pro, how can I confirm it is hashing at the specified 21TH/s on the KHeavyhash algorithm?

Log into the miner's web interface or your mining pool dashboard; both will display the real-time hashrate, which should stabilise around 21TH/s when the device is operating normally.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.