Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
White micro-ATX case with tempered glass side and front panels, USB 3.2 Type-C port, supports 360 mm radiator

BFKK

BFKK Micro ATX Case White USB 3.2 Type-C 360mm Water Cooling

SKU CH-375J-QD27B

A compact Micro-ATX chassis with dual tempered-glass panels, front USB 3.2 Gen2 Type-C, room for 400 mm graphics cards and 360 mm radiator support

  • TypeMicro ATX

Options White

  • Double-sided tempered glass gives a clear view of the build
  • Supports ATX, Micro-ATX and Mini-ITX motherboards for flexible builds
  • Fits graphics cards up to 400 mm long for modern GPUs
  • Nine fan positions plus 360 mm radiator support for strong cooling
  • Front USB 3.2 Gen2 Type-C port enables fast data transfer

Built for Micro ATX and Mini-ITX

This white micro ATX chassis fits ATX, Micro-ATX and Mini-ITX motherboards. It measures 439 mm long, 285 mm wide and 400 mm high. Two tempered glass panels show the build. A front USB 3.2 Gen 2 Type-C port and USB 3.0 headers provide fast I/O. Nine fan positions and a 360 mm radiator mount give strong cooling headroom.

Suits builders who want glass panels

The 400 mm graphics card limit covers current 40-series cards. Builders needing E-ATX support or more than nine fan slots should look elsewhere. Anyone wanting a smaller Mini-ITX-only footprint will find this case larger than necessary. The horizontal glass layout also demands careful placement to avoid panel damage.

Maximum graphics card length 400 mm

This single figure decides if your GPU fits. The case accepts cards up to 400 mm long, matching the length of many 40-series models. Check your card's exact length before buying; longer cards will not install.

Přednosti

  • Double-sided tempered glass gives a clear view of the build
  • Supports ATX, Micro-ATX and Mini-ITX motherboards for flexible builds
  • Fits graphics cards up to 400 mm long for modern GPUs
  • Nine fan positions plus 360 mm radiator support for strong cooling
  • Front USB 3.2 Gen2 Type-C port enables fast data transfer

Specifikace

TypeMicro ATX

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How does a 360 mm water-cooling radiator actually fit inside this Micro ATX case?

The chassis provides nine fan positions and a 439 mm depth, giving enough clearance for a 360 mm radiator in the front or top without interfering with the 400 mm graphics-card limit.

What does the USB 3.2 Gen 2 Type-C front port mean for everyday transfers?

The front-panel Type-C connector follows the USB 3.2 Gen 2 standard, so supported drives and peripherals can operate at the interface's rated throughput when the motherboard header matches.

Will a standard ATX power supply and full-size graphics card mount cleanly in this 285 mm-wide case?

Yes, the 285 mm width and 439 mm length accommodate ATX power supplies and graphics cards up to 400 mm, while still fitting Micro ATX, Mini-ITX and ATX motherboards.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.