BIWIN STORAGE TECHNOLOGY LIMITED
BIWIN STORAGE TECHNOLOGY LIMITED 60GB MLC SATA M.2 2242 internal SSD
- Internal Solid Stat…
- M.2 2242
31,99 US$
0.00041268BTC
Skladem
BIWIN STORAGE TECHNOLOGY LIMITED
BIWIN STORAGE TECHNOLOGY LIMITED 120GB MLC SATA M.2 2242 internal SSD
A 120GB M.2 2242 SATA internal SSD with MLC flash delivering up to 500 MBps read and 450 MBps write speeds
- Device TypeInternal Solid State Drive (SSD)
- Form FactorM.2 2242
- Capacity120GB
- Memory ComponentsMLC
- Max Sequential ReadUp to 500 MBps
- Max Sequential WriteUp to 450 MBps
Options 120GB
- 120GB
- 60GB
- MLC flash delivers sustained speed and endurance
- Sequential read reaches 500 MBps for fast boot and load times
- Sequential write hits 450 MBps to move large files quickly
- Idle power of 0.27W extends laptop battery life
- Shock rated at 50G and vibration at 3.1G protects data on the move
Compact M.2 2242 form factor
This BIWIN internal SSD fits the M.2 2242 slot and provides 120GB of MLC flash storage. It connects through a SATA III 6Gb/s interface for broad laptop and small-form-factor desktop compatibility.
Sustained workload behaviour
Sequential reads reach up to 500 MBps and writes up to 450 MBps while active power draw stays at 1.97W. The drive operates from 0°C to 70°C and is rated for 50G shock and 3.1G vibration resistance.
Installation notes
The 42mm by 22mm by 3.2mm card weighs 5.4g and uses a single keyed notch, so it inserts directly into the slot without cables. Ensure the motherboard BIOS recognises SATA M.2 devices; some platforms only support PCIe signalling on this connector.
Přednosti
- MLC flash delivers sustained speed and endurance
- Sequential read reaches 500 MBps for fast boot and load times
- Sequential write hits 450 MBps to move large files quickly
- Idle power of 0.27W extends laptop battery life
- Shock rated at 50G and vibration at 3.1G protects data on the move
Specifikace
| Brand | BIWIN |
|---|---|
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | M.2 2242 |
| Capacity | 120GB |
| Memory Components | MLC |
| Max Sequential Read | Up to 500 MBps |
| Max Sequential Write | Up to 450 MBps |
| Power Consumption (Idle) | 0.27W (Idle) |
| Power Consumption (Active) | 1.97W |
| Operating Temperature | 0°C to 70°C |
| Storage Temperature | -40°C to 85°C |
| Operating Humidity | 5% to 95% |
| Max Shock Resistance | 50G,11ms, half-sine wave |
| Max Vibration Resistance | 3.1G(2-500Hz) |
| Height | 42mm |
| Width | 22mm |
| Depth | 3.2mm |
| Weight | =5.4g |
Další verze tohoto modelu
Dalších 1 v této řadě
Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.
Otázky k tomuto produktu
How hot and power-hungry is the 120GB MLC SATA M.2 2242 drive during all-day use?
It draws 0.27W at idle and 1.97W active, with an operating range of 0°C to 70°C and a 2 million hour MTBF rating.
What must my motherboard provide for this M.2 2242 SATA III 6Gb/s SSD to function?
A 2242-length M.2 slot wired for SATA III 6Gb/s and 3.3V ±5% power; the drive measures 42mm × 22mm × 3.2mm and weighs 5.4g.
Will this SATA III 6Gb/s M.2 2242 drive work alongside my older SATA 3Gb/s 2.5-inch SSD?
Yes, it runs on the same SATA III 6Gb/s interface and is backward compatible with SATA 3Gb/s ports, delivering up to 500 MB/s read and 450 MB/s write.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
