Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green DDR3 DIMM sticks, 240-pin, no heat spreader

Computer Memory Solutions

Computer Memory Solutions CM5126410600DIMM 8GB (2x4GB) DDR3 1333MHz memory upgrade

SKU CH-RX9D-T2X0S

8GB DDR3 1333MHz dual-channel kit (2×4GB, CL9, 1.5V) for HP 4000 Pro SFF desktops

  • Capacity8GB (2 x 4GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 8GB total capacity lets you run more applications simultaneously
  • Dual-channel kit with two matched 4GB modules boosts throughput
  • 1333MHz DDR3 speed matches the HP 4000 Pro bus specification
  • Non-ECC unbuffered 240-pin DIMMs install directly into the desktop slots
  • Guaranteed compatibility with listed HP/Compaq 4000 Pro SFF models

Targeted upgrade for HP 4000 Pro SFF

This kit delivers 8 GB of DDR3 memory across two 4 GB unbuffered DIMMs built specifically for the HP/Compaq Business Desktop 4000 Pro (SFF). The modules run at 1333 MHz with CL9 timings at 1.5 V and carry the CM5126410600DIMM part number. Computer Memory Solutions guarantees compatibility with the listed HP part numbers including A7H78UT and LA069UT.

Suits owners of the listed HP desktops.

Buyers who need ECC error correction or registered modules should look elsewhere because this kit is non-ECC and unbuffered. The package contains exactly two sticks, so systems with only one memory slot or a different pin layout cannot use it. Maximum supported capacity for the target machine is 8 GB, limiting further expansion.

Dual-channel pair running at 1333 MHz

The two modules are designed to be installed as a matched pair to enable dual-channel operation on the HP 4000 Pro platform. HP documentation notes the memory bus operates at 1066 MHz even when 1333 MHz modules are fitted. A 64-bit operating system is required to address the full 8 GB capacity.

Přednosti

  • 8GB total capacity lets you run more applications simultaneously
  • Dual-channel kit with two matched 4GB modules boosts throughput
  • 1333MHz DDR3 speed matches the HP 4000 Pro bus specification
  • Non-ECC unbuffered 240-pin DIMMs install directly into the desktop slots
  • Guaranteed compatibility with listed HP/Compaq 4000 Pro SFF models

Specifikace

BrandComputer Memory Solutions
ModelCM5126410600DIMM
Capacity8GB (2 x 4GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp/Compaq Business Desktop 4000 Pro (Sff)
Package Content2 Memory RAM Sticks

Otázky k tomuto produktu

Will these 1333 MHz DDR3 modules run at full speed in my HP 4000 Pro SFF, or does the motherboard limit the bus to 1066 MHz?

HP documentation states the memory bus runs at 1066 MHz, so the 1333 MHz modules will operate at that lower speed.

How can I confirm the kit is running in dual-channel mode after installing both 4 GB sticks?

Enter the BIOS or use a system-information tool; it should report 8 GB total with dual-channel active when both modules are seated in the paired slots.

Does the package include only the two 4 GB DIMMs, or are any tools or cables supplied?

The box contains two 240-pin DDR3 memory sticks and nothing else; no tools, cables or brackets are included.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.