Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver aluminum mid-tower case with pixel cube front panel

Corn Electronics

Corn Electronics Pixel One All Aluminum PC Case Silver

SKU CH-EBSM-71PB5

All-aluminium E-ATX mid-tower holding two 3.5″ drives, one 2.5″ drive, GPU up to 420 mm and cooler up to 180 mm, with top, bottom and rear fan mounts plus front USB-C, USB 3.0 and audio

  • TypeE-ATX Mid Tower Chassis
  • Case MaterialAluminum
  • Internal 3.5" Drive Bays2
  • Internal 2.5" Drive Bays1
  • Max GPU Length420 mm
  • Max CPU Cooler Height180 mm

Options Pixel One (Silver)

  • All-aluminium construction gives a rigid, lightweight chassis
  • E-ATX motherboard support fits the largest standard boards
  • 420 mm GPU clearance accommodates long graphics cards
  • 180 mm CPU cooler height allows tall air coolers
  • Front panel offers USB Type-C, USB 3.0 and audio connections

Build foundation

The Corn Electronics Pixel One is an all-aluminium E-ATX mid-tower designed for builders who want a rigid, premium chassis that accepts full-size motherboards. Its silver finish and clean lines suit workstations or high-end gaming rigs where structural integrity matters.

Component clearance

The case fits graphics cards up to 420 mm long and CPU coolers up to 180 mm tall, so large air towers and triple-slot GPUs install without modification. Two internal 3.5-inch bays and one 2.5-inch bay handle traditional storage, while the front panel provides one USB-C, one USB 3.0 and one audio port for daily peripherals.

Thermal headroom

Fan mounts cover the top with three 140 or 120 mm positions, the bottom with two 140 or three 120 mm positions, and the rear with a single 120 mm slot. This layout lets you push high static-pressure airflow through dense radiators or heatsinks during extended rendering or gaming sessions without relying on a single intake path.

Přednosti

  • All-aluminium construction gives a rigid, lightweight chassis
  • E-ATX motherboard support fits the largest standard boards
  • 420 mm GPU clearance accommodates long graphics cards
  • 180 mm CPU cooler height allows tall air coolers
  • Front panel offers USB Type-C, USB 3.0 and audio connections

Specifikace

TypeE-ATX Mid Tower Chassis
Case MaterialAluminum
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays1
Max GPU Length420 mm
Max CPU Cooler Height180 mm

Další verze tohoto modelu

Dalších 4 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How long a graphics card fits in the Pixel One case?

The chassis accepts GPUs up to 420 mm long, so most triple-fan models will install without hitting the front panel.

What temperatures and fan noise should I expect when the system runs continuously?

With three 140 mm or 120 mm fans on top, two 140 mm or three 120 mm fans at the bottom and a rear 120 mm exhaust, sustained loads stay cool and noise remains moderate.

Which motherboards and power supplies are compatible out of the box?

E-ATX, ATX, Micro-ATX and Mini-ITX boards all fit, and any standard ATX power supply mounts in the bottom chamber.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.