Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black ATX mid-tower case with frameless 270° tempered glass panels and floating ARGB base

darkFlash

darkFlash DF-F1A-BK-6F PC case

SKU CH-DR6G-6T2TH MPN DF-F1A-BK-6F

ATX mid-tower with 270° frameless tempered glass, six pre-installed ARGB fans, floating ARGB base, 415 mm GPU support, 360 mm top radiator clearance, and 10 Gbps USB-C front I/O

  • Front Portsthe front I/O includes 10 Gbps USB 3.2 Gen 2 Type-C, two USB
  • ColorBlack
  • Case MaterialSteel / Tempered Glass
  • TypeATX Mid Tower
  • Internal 3.5" Drive Bays2
  • Internal 2.5" Drive Bays3

Option Black

  • Frameless 270° tempered glass gives a full view of components and lighting
  • Floating ARGB base lifts the case for better bottom airflow and a distinctive look
  • Six pre-installed ARGB fans provide strong airflow and vivid lighting out of the box
  • Back-connect motherboard support keeps cable routing clean while fitting GPUs up to 415 mm
  • Front USB 3.2 Gen 2 Type-C at 10 Gbps plus dual USB 3.0 ports deliver high-speed connectivity

Mid-tower ATX case with frameless glass

The darkFlash FLOATRON F1 is a black steel chassis with 270° frameless tempered glass panels and a floating ARGB base. It targets builders who want a panoramic view of internal components and pre-installed lighting without extra fan purchases. Six ARGB fans come fitted as standard.

Thermal behaviour under sustained load

The floating base design creates an 8° angled intake path that feeds cool air directly to the GPU and CPU area during extended sessions. Top-mounted 360 mm radiator support and room for up to ten 120 mm fans let the case maintain airflow when components run at full power for long periods.

GPU clearance decides compatibility

A maximum graphics-card length of 415 mm determines whether a high-end card will fit inside the 452 x 240 x 456 mm enclosure. Builders planning longer cards must choose a different chassis, while shorter cards install with ample room for cable routing.

Přednosti

  • Frameless 270° tempered glass gives a full view of components and lighting
  • Floating ARGB base lifts the case for better bottom airflow and a distinctive look
  • Six pre-installed ARGB fans provide strong airflow and vivid lighting out of the box
  • Back-connect motherboard support keeps cable routing clean while fitting GPUs up to 415 mm
  • Front USB 3.2 Gen 2 Type-C at 10 Gbps plus dual USB 3.0 ports deliver high-speed connectivity

Specifikace

Front Portsthe front I/O includes 10 Gbps USB 3.2 Gen 2 Type-C, two USB 3.0 ports, HD audio, Reset, and LED controls.
BranddarkFlash
ModelF1 ATX PC Case-Black
ColorBlack
Case MaterialSteel / Tempered Glass
TypeATX Mid Tower
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays3
Pre-installed FansSix Pre-Installed ARGB Fans
Max GPU Length415 mm
Max CPU Cooler Height180 mm
Max PSU Length200 mm
Dimensions452 x 240 x 456 mm
Přepravní hmotnost10.84 kg
Rozměry balení516 × 483 × 318 mm

Další verze tohoto modelu

Dalších 1 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How much heat can the six pre-installed ARGB fans and a top-mounted 360 mm radiator move during an all-day gaming session?

The case ships with six ARGB fans already fitted and supports up to ten 120 mm fans in total, plus a 360 mm or 240 mm radiator in the roof, giving plenty of airflow headroom for sustained loads.

Which motherboard form factors and cable-routing styles does the chassis accept without extra brackets?

It fits ATX, Micro-ATX and Mini-ITX boards and is designed for back-connect motherboards, so cables route behind the tray for a cleaner interior.

Will my existing 415 mm graphics card and 180 mm CPU cooler fit together in this mid-tower?

The interior clears graphics cards up to 415 mm long and CPU coolers up to 180 mm tall, so most current high-end parts install without interference.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.