DELL
DELL 400-AVVY 1.2TB 2.5" SAS 10000 RPM 12Gb/s internal hard drive
A 1.2TB 2.5" SAS hard drive spinning at 10000 RPM with a 12Gb/s interface and hot-swap tray
- InterfaceSAS 12Gb/s
- Capacity1.2TB
- RPM10000 RPM
- Form Factor2.5"
- 2 TB capacity stores large datasets
- 10 000 RPM spindle accelerates data access
- SAS 12 Gb/s interface maximises throughput
- 5 inch form factor fits dense bays
- Hot-swap tray enables drive changes without shutdown
Dell 400-AVVY 1.2TB SAS 10K Drive
This Dell 400-AVVY is a 1.2TB 2.5 inch SAS hard drive spinning at 10000 RPM with a 12Gb/s interface. It is built for servers and storage arrays that require hot-swap capability and consistent enterprise performance. The drive arrives new in original or OEM packaging ready for deployment.
Suited for SAS hot-swap bays needing 10K speed
This drive fits 2.5 inch hot-swap trays that accept SAS 12Gb/s connections and benefit from 10000 RPM rotational speed. It is not for systems limited to lower transfer rates or fixed-mount configurations. Buyers needing larger capacity per bay should look at higher-density alternatives.
12Gb/s SAS interface decides compatibility
The single specification that determines fit is the 12Gb/s SAS interface paired with the 2.5 inch hot-swap form factor. Your backplane and controller must support this exact interface and tray type for the drive to function. Verify both before purchase.
Přednosti
- 2 TB capacity stores large datasets
- 10 000 RPM spindle accelerates data access
- SAS 12 Gb/s interface maximises throughput
- 5 inch form factor fits dense bays
- Hot-swap tray enables drive changes without shutdown
Specifikace
| Brand | Dell |
|---|---|
| Model | 400-AVVY |
| Interface | SAS 12Gb/s |
| Capacity | 1.2TB |
| RPM | 10000 RPM |
| Form Factor | 2.5" |
Otázky k tomuto produktu
How do I install the 400-AVVY 2.5" SAS drive in a hot-swap bay, and what step is often missed?
Slide the drive into the hot-swap tray until the SAS connector seats firmly, then lock the tray lever; the step often missed is fully engaging the lever so the 12Gb/s link initialises at 10000 RPM.
What maintenance or replacement will the 400-AVVY 1.2TB 10K SAS drive need later?
Plan to replace the drive after its rated service life or if SMART attributes show reallocated sectors; no field-serviceable parts exist inside the sealed 2.5" helium enclosure.
What limit appears first on the 400-AVVY 12Gb/s SAS drive under sustained write workloads?
The 10000 RPM spindle caps sustained throughput at the SAS 12Gb/s interface, so sequential writes saturate the mechanical media before the controller or bus becomes the bottleneck.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.



