暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

DELL

DELL 400-AVVY 1.2TB 2.5" SAS 10000 RPM 12Gb/s internal hard drive

SKU CH-FRZW-HNGGJ

A 1.2TB 2.5" SAS hard drive spinning at 10000 RPM with a 12Gb/s interface and hot-swap tray

  • InterfaceSAS 12Gb/s
  • Capacity1.2TB
  • RPM10000 RPM
  • Form Factor2.5"
  • 2 TB capacity stores large datasets
  • 10 000 RPM spindle accelerates data access
  • SAS 12 Gb/s interface maximises throughput
  • 5 inch form factor fits dense bays
  • Hot-swap tray enables drive changes without shutdown

Dell 400-AVVY 1.2TB SAS 10K Drive

This Dell 400-AVVY is a 1.2TB 2.5 inch SAS hard drive spinning at 10000 RPM with a 12Gb/s interface. It is built for servers and storage arrays that require hot-swap capability and consistent enterprise performance. The drive arrives new in original or OEM packaging ready for deployment.

Suited for SAS hot-swap bays needing 10K speed

This drive fits 2.5 inch hot-swap trays that accept SAS 12Gb/s connections and benefit from 10000 RPM rotational speed. It is not for systems limited to lower transfer rates or fixed-mount configurations. Buyers needing larger capacity per bay should look at higher-density alternatives.

12Gb/s SAS interface decides compatibility

The single specification that determines fit is the 12Gb/s SAS interface paired with the 2.5 inch hot-swap form factor. Your backplane and controller must support this exact interface and tray type for the drive to function. Verify both before purchase.

特長

  • 2 TB capacity stores large datasets
  • 10 000 RPM spindle accelerates data access
  • SAS 12 Gb/s interface maximises throughput
  • 5 inch form factor fits dense bays
  • Hot-swap tray enables drive changes without shutdown

仕様

BrandDell
Model400-AVVY
InterfaceSAS 12Gb/s
Capacity1.2TB
RPM10000 RPM
Form Factor2.5"

この商品に関する質問

How do I install the 400-AVVY 2.5" SAS drive in a hot-swap bay, and what step is often missed?

Slide the drive into the hot-swap tray until the SAS connector seats firmly, then lock the tray lever; the step often missed is fully engaging the lever so the 12Gb/s link initialises at 10000 RPM.

What maintenance or replacement will the 400-AVVY 1.2TB 10K SAS drive need later?

Plan to replace the drive after its rated service life or if SMART attributes show reallocated sectors; no field-serviceable parts exist inside the sealed 2.5" helium enclosure.

What limit appears first on the 400-AVVY 12Gb/s SAS drive under sustained write workloads?

The 10000 RPM spindle caps sustained throughput at the SAS 12Gb/s interface, so sequential writes saturate the mechanical media before the controller or bus becomes the bottleneck.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。