DELL
DELL 6KP53 3.5 HDD Carrier Tray for ME4084/ME5084
A 3.5-inch drive carrier tray for Dell ME4084 and ME5084 storage arrays
- CapacityDoes Not Apply
- InterfaceDoes Not Apply
- Designed for Dell ME4084 and ME5084 arrays
- Fits 3.5 inch hard drives securely
- New carrier tray ready for installation
- Part number 6KP53 matches Dell specifications
- Tested components with updated firmware
Dell 6KP53 Carrier Tray
The Dell 6KP53 is a 3.5-inch hard-drive carrier tray built for the ME4084 and ME5084 storage arrays. It provides the mechanical interface that lets a standard 3.5-inch drive slide into the enclosure's drive bays. System administrators maintaining these Dell platforms use it to replace a damaged tray or to populate empty slots with additional drives.
Tool-free drive installation
The tray uses a tool-free design so a 3.5-inch drive can be secured without screws. Alignment pins on the tray match the drive's mounting holes; pressing the drive in until it clicks locks it in place. The most common issue is inserting the drive upside-down or failing to engage both pins, which prevents the tray from seating fully in the bay.
Empty carrier for 3.5-inch drives
Supplied without a drive, the carrier adds no storage capacity of its own. It simply enables each installed 3.5-inch drive to connect to the array's backplane. The practical limit is the number of drive bays in the ME4084 or ME5084 chassis; once every bay holds a tray, no further drives can be added without expanding the enclosure.
Přednosti
- Designed for Dell ME4084 and ME5084 arrays
- Fits 3.5 inch hard drives securely
- New carrier tray ready for installation
- Part number 6KP53 matches Dell specifications
- Tested components with updated firmware
Specifikace
| Brand | Dell |
|---|---|
| Model | 6KP53 |
| Capacity | Does Not Apply |
| Interface | Does Not Apply |
Otázky k tomuto produktu
How do I confirm the 6KP53 carrier tray is seated correctly in my ME4084 enclosure?
Slide the tray into a drive bay until the latch clicks; the enclosure’s front-panel LED will show solid green when the drive inside is detected and healthy.
What comes with the 6KP53 tray and what must I supply?
The tray itself ships in retail or OEM packaging; you must provide a 3.5-inch hard drive and four mounting screws.
Should I choose the 6KP53 tray for an ME4084 or an ME5084?
The 6KP53 is compatible with both the ME4084 and ME5084, so either enclosure uses the same tray.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
