DELL
DELL 6KP53 3.5 HDD Carrier Tray for ME4084/ME5084
A 3.5-inch drive carrier tray for Dell ME4084 and ME5084 storage arrays
- CapacityDoes Not Apply
- InterfaceDoes Not Apply
- Designed for Dell ME4084 and ME5084 arrays
- Fits 3.5 inch hard drives securely
- New carrier tray ready for installation
- Part number 6KP53 matches Dell specifications
- Tested components with updated firmware
Dell 6KP53 Carrier Tray
The Dell 6KP53 is a 3.5-inch hard-drive carrier tray built for the ME4084 and ME5084 storage arrays. It provides the mechanical interface that lets a standard 3.5-inch drive slide into the enclosure's drive bays. System administrators maintaining these Dell platforms use it to replace a damaged tray or to populate empty slots with additional drives.
Tool-free drive installation
The tray uses a tool-free design so a 3.5-inch drive can be secured without screws. Alignment pins on the tray match the drive's mounting holes; pressing the drive in until it clicks locks it in place. The most common issue is inserting the drive upside-down or failing to engage both pins, which prevents the tray from seating fully in the bay.
Empty carrier for 3.5-inch drives
Supplied without a drive, the carrier adds no storage capacity of its own. It simply enables each installed 3.5-inch drive to connect to the array's backplane. The practical limit is the number of drive bays in the ME4084 or ME5084 chassis; once every bay holds a tray, no further drives can be added without expanding the enclosure.
Punti di forza
- Designed for Dell ME4084 and ME5084 arrays
- Fits 3.5 inch hard drives securely
- New carrier tray ready for installation
- Part number 6KP53 matches Dell specifications
- Tested components with updated firmware
Caratteristiche tecniche
| Brand | Dell |
|---|---|
| Model | 6KP53 |
| Capacity | Does Not Apply |
| Interface | Does Not Apply |
Domande su questo articolo
How do I confirm the 6KP53 carrier tray is seated correctly in my ME4084 enclosure?
Slide the tray into a drive bay until the latch clicks; the enclosure’s front-panel LED will show solid green when the drive inside is detected and healthy.
What comes with the 6KP53 tray and what must I supply?
The tray itself ships in retail or OEM packaging; you must provide a 3.5-inch hard drive and four mounting screws.
Should I choose the 6KP53 tray for an ME4084 or an ME5084?
The 6KP53 is compatible with both the ME4084 and ME5084, so either enclosure uses the same tray.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
